Applications in Indiana

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in Indianapolis, INDIANA (USA).

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd Distributor in Indianapolis, INDIANA (USA).

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH Office in Chesterton, INDIANA (USA).

  • Premium

    Meteorological sensors for solar monitoring

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in Indianapolis, INDIANA (USA).

  • Biodiesel Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

  • Gas infusion technology solutions for the CO2 capture with solutions4CO2

    S4CO2`s Gas inFusion technology extracts CO2, NO2, and SO2 from flue gas and biogas and efficiently mass transfers high concentrations of the extracted CO2 into water. The technology is highly modular, dissolves separated gases into water in a bubbleless fashion, is energy efficient, and operates at ambient pressures. Uses include proven rapid acceleration of algae growth for third generation biofuels production, nutraceuticals, pharmaceuticals, animal / aqua feed, mineralization and separation into clean commercial CO2.

    By inVentures Technologies Incorporated. Distributor in INDIANA (USA).

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO Distributor in Indianapolis, INDIANA (USA).

  • Bulk Fuel Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you