Applications in Minnesota

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Office in Minneapolis, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for HVAC & facility

    Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for chemical industry

    Spire Metering provides non-intrusive measurement solutions for the chemical industry where aggressive and toxic liquids needed to be monitored.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for vehicle and vessel

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. Office in Medford, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for food and beverage

    For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for pharmaceutical & semiconductor

    Several Spire Metering flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Pharmaceutical & Semiconductor Applications.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for utility & management

    There has never been a more crucial time to capture and evaluate every facet of today’s demanding energy environment. Spire Metering’s Prime Series utility meter solutions provide sustained accuracy, lead to conservation of resources, and reduce overall operational costs.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for oil and petrochemical

    Crude oil (after first stage separator), offloading of crude oil, water injection or refined petroleum. EF10-C clamp-on,non-intrusive ultrasonic flowmeter for easy installation. The enclosure is IP65 (NEMA 4X) wall-mount type. Class 1 Div 2 version can be offerred upon request.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for pulp & paper industry

    Many organizations in the Pulp & Paper industry use these flowmeters to improve all processes and maximize plant performance; integrate flow information for better decision making at management level and to optimize maintenance.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Premium

    Flow & Energy Management Solutions for power & thermal plant

    Spire Metering is a great fit for Power Plant, Thermal Energy Production Plants.

    By Spire Metering Technology Distributor in Golden Valley, MINNESOTA (USA).

  • Dispensing

    DCI offers custom and standard components for dispensing liquids and powders.

    By Dispensing Components Inc based in Eden Prairie , MINNESOTA (USA).

  • Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc Office in Eden Prairie, MINNESOTA (USA).

  • Solutions for the chemicals & oil industry

    From exploration to extraction, we`re leading the field with technological development of the industry and the discovery of new sources.

    By Oxford Instruments plc Office in Eden Prairie, MINNESOTA (USA).

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Gas infusion technology solutions for the CO2 capture with solutions4CO2

    S4CO2`s Gas inFusion technology extracts CO2, NO2, and SO2 from flue gas and biogas and efficiently mass transfers high concentrations of the extracted CO2 into water. The technology is highly modular, dissolves separated gases into water in a bubbleless fashion, is energy efficient, and operates at ambient pressures. Uses include proven rapid acceleration of algae growth for third generation biofuels production, nutraceuticals, pharmaceuticals, animal / aqua feed, mineralization and separation into clean commercial CO2.

    By inVentures Technologies Incorporated. Distributor in Eagan,, MINNESOTA (USA).

  • Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc Office in Eden Prairie, MINNESOTA (USA).

  • Process technologies for making solar cells

    Oxford Instruments Plasma Technology has developed a number of processes for the production of Photovoltaics (solar cells) using our flexible and powerful tools and with key technologies.

    By Oxford Instruments plc Office in Eden Prairie, MINNESOTA (USA).

  • Measurement of oil content of oil bearing algae used for biofuel production

    We assist the rapidly growing global biofuels industry through our MQC analysers, speeding up analyses by up to 250 times, and dispensing with the need for hazardous solvents and skilled operators required for traditional methods such as soxhlet extraction and chromatography. Benchtop, non-destructive single seed analysers enable seed breeders to select the highest oil bearing single seeds, accelerating the breeding of high oil bearing seeds for biofuel purposes by up to five years. Typical seeds are Jatropha and Camelina; our breadth of applications capability allows almost all seeds to be characterised. Benchtop seed analysers allow seed co-operatives and biofuel crushers/processors rapidly and accurately to measure the oil and moisture content of biofuel seeds. This enables farmers to be paid according to oil content, and crushing/oil processing to be optimised for the oil and moisture content to achieve the highest quality biofuel output.

    By Oxford Instruments plc Office in Eden Prairie, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you