Applications in New Jersey

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Distributor in Boonton, NEW JERSEY (USA).

  • Premium

    Meteorological sensors for solar monitoring

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in NEW JERSEY (USA).

  • Premium

    Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. Distributor in Bridgewater, NEW JERSEY (USA).

  • Premium

    Strategic market research solutions for hydropower & renewable energy industry

    Bringing together the world’s most respected hydropower and renewable energy information resources under one roof, PennWell dominates the market with an unparalleled network of publications, events and websites. Get news and information in both digital and print format, participate in trade show and conference events worldwide, understand global markets and discover expert resources for technology, finance, and policy knowledge. More than 500,000 renewable energy professionals rely on PennWell’s renewable energy world network for the information, news, answers and updates they need most. No other network provides a broader reach of the leaders impacting the future of the industry.

    By PennWell Corporation Office in Fair Lawn, NEW JERSEY (USA).

  • Premium

    Specialty Cleaners and Lubricants for Solar Industry

    IPC manufactures specialty detergents for solar panel cleaning applications.  Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is effective.  Contact us today for a sample of our solar panel cleaners.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Multiparameter Monitoring for the Renewable Energy Industry

    Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.

    Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

    By Valeport Ltd Distributor in Windsor, NEW JERSEY (USA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc Office in Somerset, NEW JERSEY (USA).

  • Premium

    Strategic market research solutions for leds & lighting industry

    The PennWell LED & Lighting Network bridges the global spectrum of light. We are a network of information resources, serving the global lighting industry with a comprehensive series of publications, events and research capabilities covering every aspect of lighting.  From the manufacturer to the designer, our mission is to bridge the global spectrum of light with the highest level of excellence in editorial, technical content and business development opportunities, providing 360-views of the global market.  United together, our network of resources drives innovation and inspires solutions in LEDs and lighting by connecting the technology with the applications of the future.

    By PennWell Corporation Office in Fair Lawn, NEW JERSEY (USA).

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC Distributor in NEW JERSEY (USA).

  • Wind monitoring for the offshore wind energy

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc Distributor in Windsor, NEW JERSEY (USA).

  • Sulfur monitoring in gas feedstock for fuel cell power plant

    Trace level sulfur measurement (

    By MKS Instruments, Inc. Distributor in Windsor, NEW JERSEY (USA).

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Solutions for the chemicals & oil industry

    From exploration to extraction, we`re leading the field with technological development of the industry and the discovery of new sources.

    By Oxford Instruments plc Distributor in Windsor, NEW JERSEY (USA).

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Gas infusion technology solutions for the CO2 capture with solutions4CO2

    S4CO2`s Gas inFusion technology extracts CO2, NO2, and SO2 from flue gas and biogas and efficiently mass transfers high concentrations of the extracted CO2 into water. The technology is highly modular, dissolves separated gases into water in a bubbleless fashion, is energy efficient, and operates at ambient pressures. Uses include proven rapid acceleration of algae growth for third generation biofuels production, nutraceuticals, pharmaceuticals, animal / aqua feed, mineralization and separation into clean commercial CO2.

    By inVentures Technologies Incorporated. Distributor in NEW JERSEY (USA).

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd Distributor in Windsor, NEW JERSEY (USA).

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO Distributor in Hamilton, NEW JERSEY (USA).

  • Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc Distributor in Windsor, NEW JERSEY (USA).

  • Process technologies for making solar cells

    Oxford Instruments Plasma Technology has developed a number of processes for the production of Photovoltaics (solar cells) using our flexible and powerful tools and with key technologies.

    By Oxford Instruments plc Distributor in Windsor, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you