oil Articles
-
A New way to Skim and Save – Reprinted from Biodiesel magazine - Case study
Oil and water don’t mix; efficiency and profits often do. While the oil and water adage is well known to biodiesel producers — it means feedstock is contaminated with water — it also offers an opportunity. Biodiesel plant personnel are always looking for new tools and equipment that help a facility operate more ...
-
Hot rolling mill lubrication specialist recovers virtually all their lubricating oil - Case study
As with all hot rolling mills, lubricants and hydraulic oils from the rolling mills and auxiliary equipment find their way into cooling water. The water systems are totally enclosed so this waste oil must be removed before the water is re-circulated and damage is done to the product and the efficiency of the process. It has been documented that the Oil Skimmers Inc. “floating tube” ...
-
Precautions for on-site filtration of transformer oil,transformer oil dehydrator plant
At the transformer installation site, some tips for transformer oil dehydrator process: 1).Fences and warning signs should be set up in the transformer installation and construction area. 2).Fireworks are strictly prohibited in the transformer construction area, and sodium carbonate dry powder fire extinguishers are provided on-site. 3).Before filtering oil, it is necessary to check that all ...
-
SOCAVER Thermal Gas Supply - Case Study
SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...
-
Oil mixing – color unimportant
A mineral oil is straight line product of oil refining that’s why their cost isn’t high. Properties of mineral oils: high evaporability, convertibility of chemical parameters in various service conditions of cars. Large numbers of additives in oil mixing process improve mineral oil properties. Synthetic oil has been manufactured by a synthesis method of chemical components. ...
-
An experimental investigation on the performance, emission and combustion characteristics of preheated calophyllum inophyllum linn oil (honne oil) fed DI diesel engine
The present work examines the use of a non–edible vegetable oil namely honne oil, a new possible source of alternative fuel for diesel engine. The use of honne oil (unheated and preheated) in an agricultural direct injection (DI) diesel engine has not been reported in the literature. The high viscosity of honne oil can be reduced by preheating (preheated to 60°C). The effect of ...
-
Exactly What Is An Oil Sludge Pyrolysis Plant
Oil sludge hails from drilling, exploration, and refining oil resources. It consists of water, sludge, and oil, which in turn increases environmental pollution when not processed properly. However, oil sludge also boasts plenty of valuable oil, which provides an attractive income ability to a number of investors. For this reason a lot of companies made our minds up to buy oil sludge pyrolysis ...
-
What Is An Oil Sludge Pyrolysis Plant
Oil sludge hails from drilling, exploration, and refining oil resources. It is composed of water, sludge, and oil, which frequently increases environmental pollution if not processed properly. However, oil sludge also boasts a lot of valuable oil, that offers an appealing income ability to a number of investors. That is why so many companies decided to invest in oil-sludge pyrolysis plants. ...
-
Not any lubricant is suitable for rod making machines
First of all, it is not better to add oil: the design of a piece of sawdust briquette making machine strictly stipulates the amount of fuel, and the operator should replenish the lubricant according to the instructions and daily observation of the oil standard, sight glass, etc. If more oil is added instead, it has certain side effects. Secondly, not all lubricating oils are suitable for rod ...
-
Understanding What Oil Sludge Pyrolysis Plant Can Handle
What is Oil Sludge? Before delving into the capabilities of oil sludge pyrolysis plants, it is essential to understand what oil sludge entails. Oil sludge is a byproduct of oil refining and drilling operations, comprising a mixture of oil, water, solids, and various contaminants. This viscous substance poses significant environmental risks if not managed properly, as it can contaminate soil, ...
-
Methods of oil/fuel analysis
PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...
By GlobeCore PC
-
What Exactly Is An Oil Sludge Pyrolysis Plant?
Oil sludge is produced through drilling, refining, and exploration of numerous oil resources. It is composed of sludge, water, and oil, which could increase environmental pollution when they are not processed properly. Oil sludge is yet another valuable resource that offers the chance to produce money. This is the reason the reasons manufacturers are actually purchasing the oil sludge pyrolysis ...
-
The Function of Vacuum Oil Purifier
The function of the Vacuum Oil Purifier is actually to remove the impurities in the oil and to purify the new oil. Not only does the waste oil after use need to reach a certain standard when it is discharged again, but many new oils also need to be purified before using. In order to protect the use of equipment, improve efficiency, etc. During use, lubricating oil, hydraulic oil, transformer ...
-
How do you purify tire plastic pyrolysis oil?
DOING waste oil distillation plant can purify and improve the color, smell and quality of waste tire plastic pyrolysis oil and get high quality diesel oil. The diesel oil got is in high quality and can be used for tractors, trucks, generators, boilers, etc., which has a great sales market. DOING waste oil distillation machine is the most advanced technology in the waste oil and crude oil ...
-
Performance and emission characteristics of calophyllum inophyllum linn oil (blends and preheated) in an agricultural diesel engine
The present work examines the use of a non-edible oil namely honne oil, a new possible source of alternative fuel for diesel engine. The uses of honne oil either in neat form or blended (unheated or preheated) with diesel fuel in diesel engine has not been reported in the literature. The viscosity of honne oil can be reduced by blending it with diesel fuel. Even after blending, viscosity is high ...
-
Strategic thinking on oil development in China
It is expected that crude oil production in China will maintain its current level until 2020. Driven by higher living standards and the rapid development of energy intensive industries, China's oil demand will increase rapidly and might lead to heavier import dependency. Three cases of demand forecasts are presented, but for the sake of sustainable economic and social development, neither the ...
-
The Importance of Lubricant and Fluidanalysis in Predictive Maintenance
Immediate Benefit of In-service Oil Analysis Lubricants are the life blood of oil wetted machinery. As an important element of predictive maintenance technologies, in-service oil analysis can provide trace information about machine wear condition, lubricant contamination as well as lubricant condition (Figure 1). Reliability engineers and maintenance professionals can make maintenance decisions ...
-
Utilisation of shale oil by the extraction and retorting of oil shale
Extraction of the bitumen fraction of oil shale was carried out using two different solvents, chloroform and toluene. Oil shale of 4.0 mm particle size from the El-Lajjun area in Jordan was used in this study. The solvents were recovered by distillation. The spent shale was retorted using a special retort and shale oil (Kerogen) was recovered. The quantity of the hydrocarbon was compared with ...
-
Learning More About Oil Sludge Pyrolysis Plant Technology
On earth of oil production, during exploration, drilling, and refining, oil sludge is normally found. Oil sludge is comprised of a mixture of water, sludge, oil and also other contaminants that can be damaging to the environment. If oil sludge is not really processed properly, there may be more pollution inside an environment that is already experiencing mounting pollution problems. Fortunately ...
-
What You Must Know Of The Oil Sludge Pyrolysis Plant
Oils sludge is derived from drilling, exploration, and the whole process of refining different oil resources. It is made up of sludge, water, and oil which can result in environmental pollution when it is not processed properly. However, oil sludge contains a good amount of oil which creates favorable income opportunities. These are the factors why many investors are buying oil sludge pyrolysis ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you