Waste tyre to oil pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of waste tire pyrolysis machines which are extensively used for recycling waste rubber, waste tyres and waste plastic.
Huayin waste tyre to oil pyrolysis plant are equipped with best quality raw material to ensure our machine service life and improve oil productivity.A: Reactor
1. The raw material of reactor is Q345R. Q345R is mainly used for pressure vessel because it can be continuously heated for long time.
2. Auto-welding with carbon arc air gouging technique.
3. The reactor is fully covered by thermal insulation. Heat preservation effect is good.
4. The gear is separated from the reactor. It avoids deformation after being heated for long time. Even it is broken you only need to change the gear. The maintenance cost is low.
5. Gaps are sealed by asbestos pad.
6. There is an safety net inside the reactor. It prevents the raw materials going to accessories and avoiding blocking.
7. There are spiral plates inside of the reactor cab help to auto-feed and slag.
8. Feed port is round shape. It can work with auto-feeder. It helps you feed more raw materials and improve working efficiency.
1. Reduce the speed of oil gas.
2. Purify oil gas.
3. Catalyst improves oil quality and oil yield.
1. Purify oil gas with recycling water.
2. Water sealing design guarantees that the tail gas can not go back to reactor so keep machine safe.
3. Separate heavy oil and water.
4. Make heavy oil go into first oil tank.
(Vertical Condenser and horizontal Condenser)
1. Adopt 3 processes of cooling to improve oil yield and oil quality.
2. No jam with oil and gravity.
3. Easy to clean the channel, low labor intensity.
5. Flange connection and easy to maintenance.
There are 4th generation oil tank and 5th generation oil tank. One is the heavy oil tank and the other is the light oil tank.F: Anti-back fire device
1. Recycle tail gas to furnace. It is environmental protection and saves your fuel.
2. Water sealing design guarantees that the tail gas can not go back to reactor and accessories so that keep machine safe.
The effect of the buffer tank is that buffer the oil gas, let the oil gas slow down.
1. huayin waste tyre to oil pyrolysis plant has auto feeder, you have no need to shred plastic, it can feed whole plastic directly.
2. The reactor has double feeding door to meet customer needs, the bigger one for feeding tyres, the smaller one for plastics.
3. Double catalyst chamber with added molecular sieve, it can absorb impurities thus avoids congestion and improves oil quality at the same time. Besides, two catalyst chambers could reach catalytic double effect that decrease pressure and remove the dust from the oil gas.
4. Two horizontal condensers instead of 5 vertical condenser, and also the volume of one horizontal condenser can be equaled with 3 vertical condensers. Besides, the length has twice, so cooling effect will be better, in this way oil output can be guaranteed and raised.
5. Another two length cooling pipes, the cooling area can be equaled with one vertical condenser, in this way, the cooling result will be better than our forth generation.
6. Double anti-back fire device and two long cooling pipes. Double anti-back fire device will be more safety,and also make full recycling tail gas. The two long pipes can be equaled with one vertical condenser, it will cooling down the tail gas again, guarantee oil output.
7. The exhaust gas, it is white, no pollution, even if you put a white towel on it, you can not see any black. It can meet the emission standard of International required.
1>Security: the equipments provided by huayin waste tyre to oil pyrolysis plant have anti-blocking device and have pressure gauges,alarms,safety valves and vacuum machine.
2>Energy conservation: recycling of exhaust gas and science fire channel design can save energy and thereby reducing costs.
3>Long life:hot-blast stove is long life,but not energy-saving,its consumption of energy is much greater than the repair costs of furnace.direct fired reactor is energy saving but short life.it is a contradiction.we resolved this conflict by thickening steel plate reactor of fire approach part which oxidized extremely,so we generally use the 14mm,16mm,18mm,20mm thickness of steel plate,or12mm stainless steel plate,other slow oxidation parts use 12mm thickness plate(20G),not only energy,but long life.
4>High degree of automation: the advance device,with a small forklift,conveyor and automatic feeder.
5>Guarantee with after sales service:we has Christian background,love is the heart of our culture.selling devices not for selling only,but to help you approach to success.quality and service is our commitment and responsibility.your success is our aim.we have a good reputation in the industry.
6>Low cost:all costs are low because of being located at the suburbs.advanced and complete processing equipments,almost no external processing and customer interests oriented business philosophy,it stands to reason that the price is low.