Honeycat cleans up VOC emissions from textile coating process - Case Study
- Product: Honeycat, Catalytic Oxidation System
- Application: Textile, Resin coating
- Customer: Permali, Ltd
- Site: Gloucester, UK
- Flowrate: 15,000, Nm3 hr-1
- VOCs: Methyl,Cellosolve, Acetone, MEK & IMS
- Concentration: 0,to 8 gNm-3
- Emission, Levels: VOCs,50 mg Nm-3 – CO,100 mg Nm-3 – NOx,100 mg Nm-3
- Installed, Date: March,2008
- Comments: The skid, mounted unit was delivered, off loaded & position on same day. The Honeycat System includes Precious Metal based Oxidation catalyst, Gas fired,burner, gas booster, VFD & heat recovery
The Honeycat Catalytic Oxidiser is designed to handle a range of VOC emissions from many different manufacturing processes. The system is based on low temperature oxidations of a wide range of VOCs in the temperature range 250-350C. The catalyst is a thin walled honeycomb support which is then coated with the active coating to give a very efficient and durable catalyst.
The system is designed to minimize the quantity of energy required and includes a heat exchanger which preheats the incoming process gases prior to entering a combustion chamber. The gases then pass into the catalyst where they are converted carbon dioxide and water vapour after which they exit into the heat exchanger thus preheating the process inlet gases.
The system can be skid mounted and prewired to minimize installation time on site and has a control panel containing all instrumentation and is PLC controlled.
-
Most popular related searches
Customer comments
No comments were found for Honeycat cleans up VOC emissions from textile coating process - Case Study. Be the first to comment!