after burner Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Thermal design and emissions of duct-burners for combined-cycle and cogenerative plants

    This paper mainly aims at demonstrating that an appropriate thermo-fluid-dynamic design optimisation of duct-burners for combined-cycle and cogenerative plants allows to satisfy restrictive emission limits, while significantly reducing the thermal stresses and the undesired pressure drops. In particular, a detailed discussion on the influence of the TEG composition and of the thermal load, ...


    By Inderscience Publishers

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • Forces attracted to fuel savings

    Magnatech Fuel Conditioning Limited have recently completed a contract to install their very powerful magnetic fuel conditioning units to all structural gas and oil burning equipment across five MOD bases in England. This was after research concluded that Magnatech was the most cost effective provider of this type of application.The MOD have used this technology previously, when a number of bases ...

  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

  • The “Tipping” Point of High Turndown Ratios: How much of a good thing is too much?

    Boilers used for domestic water and space heating are one of the highest energy consumers in residential and commercial facilities. After the global energy crisis in the 1970s, higher fuel prices prompted the search for solutions to reduce energy consumption. Back then, conventional steam boilers were the only option available. However, these boilers were very inefficient (due in part to the ...


    By Gasmaster Industries Ltd.

  • Ford Motor Co. Ltd reduce emissions by 5.1% on gas fired boiler plant using Maxsys Fuel Systems.

    As part of an ongoing objective to reduce emissions and conserve energy at the Ford Motor Company’s Dunton Technical Centre, Maxsys Fuel Systems have been fitted to the boiler plant, helping the company to achieve over 5% reduction in gas usage with a commensurate reduction in emissions. The Energy Committee at Dunton decided to investigate ways of reducing gas usage by improving ...


    By Maxsys Fuel Systems Ltd

  • A look at top-quality wood briquettes - Case Study

    The wood experts at Reuss are very happy with their RUF briquetting equipment Nowadays, wood briquettes are a popular source of fuel - but only as long as the quality is good. The people at Reuss are well aware of this fact from their long experience in the wood business, so their briquettes are made only from dry wood shavings using high-quality briquetting equipment from Ruf GmbH & ...

  • Fuel inefficiency frozen out at Findus

    The installation of the proven Maxsys Fuel System at the Benton Lane, Newcastle plant of Findus has reduced the natural gas consumed by its three boilers by 6.6%. This substantial saving will allow the company to recoup the outlay on its investment within an impressively brief 12 month period. Findus is a household name in frozen food. Few can claim never to have ...


    By Maxsys Fuel Systems Ltd

  • Case study - Maximizing heat recovery from your oxidizer and reducing operating costs

    More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. Below are ten tips to ensure your oxidizer is operating at peak performance. The first five tips focus on parameters end-users should know about ...

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • Energy efficiency: The unsung hero of our times

    As our economy continues to sputter, one little-noticed industry has been booming for a while now: energy efficiency. The sector is hiring like crazy -- a fact that speaks volumes about the close relationship between clean energy and the economic recovery that we're all waiting for. Energy efficiency could save us all. My firm works with utilities, government agencies, housing authorities, and ...

  • Adapting TPV for Use in a Standard Home Heating Furnace

    Abstract, A novel TPV configuration will be presented that can fit into a standard home furnace cabinet. This system incorporates an externally faceted glass cylinder with a dichroic filter deposited on its outer surface and a GaSb IR cell array bonded to the outer surface on top of the filter. This cylindrical array is then surrounded with an envelope containing a low boiling point liquid for ...


    By JX Crystals

  • Case study - Heat exchanger retrofit

    Overview A manufacturer of insulation films for the electronics industry needed to evaluate the capabilities of four existing oxidizers that treated emissions from its coating lines. The company was concerned that, due to oxidizer deficiencies, it would not meet regulatory requirements. The oxidizers had been manufactured by two different companies. One of them was no longer in business; ...

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Performance of the low-emission flare

    Job report / Elbisgraben (Bale / Switzerland) The summer of 1992 had finally arrived. The 5MW low emission furnace in the district heating station Liestal was ignited, supplied with landfill gas from Elbisgraben landfill. Since then the plant has been running continuously and the comprehensive measurements taken, verify that all targets aimed at have been achieved: plant ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you