Showing results for: biodiesel analyzer Articles
-
Modification of thermal and oxidative properties of biodiesel produced from vegetable oils
Trans esterification of three vegetable oils, sunflower oil, linseed oil and mixed oils as; sunflower-soyabean and olein were carried out using methanol, and potasium hydroxide as catalyst. The methyl esters of the corresponding oils were separated from the crude glycerol and characterized by physical-chemical methods to evaluate their thermal properties. This methods are determination of ...
-
Get comparable ASTM/EN data for biodiesel blend while saving time and money
If you need to verity how much biodiesel is in a diesel fuel, sending a sample off to a laboratory can take several days to get an answer. This can add unnecessary delays if a truck has just been loaded for a delivery, but must wait for the lab result. The best solution is to have an on-site test where the fuel is loaded or delivered. The two most widely used analytical methods for measuring the ...
-
Meeting the Challenges of Biodiesel Blend Measurements with Portable Mid-Infrared Analyzers - Case study
In a published paper on biodiesel blend quality submitted by the National Renewable Energy Laboratory1, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry about whether the blend ratio is correct until a problem occurs. For fleet managers, an incorrect blend can mean a total shutdown of operations. On the ...
-
Comparison of EN 14078 and ASTM D7371 infrared biodiesel methods
Infrared (IR) analysis is the most widely used measurement technology for measuring biodiesel in diesel. Both EN 14078 and ASTM D7371 methods use infrared as the analytical method and more specifically FTIR (Fourier Transform Infrared) spectroscopy. Infrared is a common spectroscopic technique used for quantitative and qualitative analysis. In the biodiesel measurement, the fatty acid methyl ...
-
InfraSpec VFA-IR Spectrometer for Biodiesel Blend Measurements
Synopsis: Simple, yet powerful, filter-based IR spectrometers are ideal for compliance to the new ASTM 7861 test method for accurately measuring biodiesel blend ratios. The Wilks InfraSpec analyzer was the instrument used to develop and validate this method and thus is the industry standard for field measurement of FAME (Fatty Acid Methyl Ester) blend percentages. Introduction: Biodiesel is a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you