biogas condensate Articles

  • CHP efficiency for biogas

    Combined heat and power plant efficiency is a function of the conversion efficiency of the energy in the fuel gas to useful energy in the form of electricity and heat. A combined heat and power (CHP) plant is typically a reciprocating gas engine that uses the energy in the gas to drive a crank shaft. The crank shaft turns an alternator to ...


    By Clarke Energy

  • Biolimp siloxa for plant for biogas cleaning

    The biogas produced in a digester, landfill or waste water plant is normally treated in order to remove water, H2S, dust and/or CO2. The choice of the cleaning method employed and the compound to be removed depends on the type of end use of the gas. This paper focuses on desing, star up and operation of biogas cleaning plant for removal dangerous component (water, H2S, NH3, siloxane and ...


    By Energy & Waste S.l

  • Biological desulphurization of Landfill biogas - Case study

    Summary Biorem's biogas desulphurization product is providing very high removal efficiencies at a landfill site in Quebec. Despite the highly variable concentrations and low winter temperatures, the system has achieved an average removal efficiency of 97%, and has maintained outlet nydrogen sulphide concentration below target consistently. As a result, the customer has realized a ...


    By Biorem Technologies Inc.

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Case study - ElectraTherm partners with GB Consulting and EnviTec Biogas on first of its kind biogas application

    Biogas/ORC Application on GE Jenbacher 412 Engine Site: Straznice, Czech Rep. Engine Power: 844kWe Green Machine Gross Power Output Avg: 30-40 kWe Thermal Input to the Green Machine: ~500kW Hot Water Input Range: 94°C Hot Water Flow: 12 l/s Liquid Loop Radiator Water Temperature: -7 to 40°C In the Czech Republic, ElectraTherm, distributor GB Consulting and ...


    By ElectraTherm

  • Anaerobic treatability and biogas production potential of selected in-mill streams

    Biochemical methane potential assays (BMP assays) were performed to study the potential of anaerobic treatment of in-mill wastewaters. The assay results indicated that condensate and the BCTMP effluent, which are currently treated with the anaerobic internal circulation reactors, were the best streams for anaerobic treatment because of their relatively high degradability (>80%) and initial rates ...


    By IWA Publishing

  • Case study - Biogas contractor and generator using Geotech’s product

    The plant generates biogas from the waste water of their pig farm; the biogas is used as a means for waste to energy to make the farm self-sustainable Geotech works closely with their distributor within the Thai biogas market, currently their Thai distributor in Bangkok, Entech has delivered over 150 fixed and portable Geotech gas analysers to biogas plants throughout Thailand. The ...

  • Case study - Biogas desulphurisation in the WWTP do Norte (Portugal)

    The Northern Wastewater Treatment Plant (WWTP) is one of the biggest in the central region of Portugal, servicing various municipalities. The infrastructure is located in the area of Coimbra, Leiria, taking up 6 hectares of land; it receives effluents from some 250,000 inhabitants across multiple municipalities. It has the capacity to treat around 38,000m3 of wastewater on a daily basis, 77% of ...


    By Bioconservacion SA

  • Case study - ElectraTherm green machine installed at biogas plant in Austria

    Biogas/Heat-to-Power Application on a GE Jenbacher 312 Location: Inning, Austria Gross Power Output Range: 18 - 32kWe Thermal Heat Input Range: 260 - 450kWt  Hot Water Input Range:  180°F (82°C) – 200°F (93°C) Hot Water Flow Range: 50 -130 GPM (3.15 – 8.21 l/s) Date Commissioned: Q1 2012 ElectraTherm installed its first Green ...


    By ElectraTherm

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Renewable resource Trechwitz ORC - Case Study

    This plant has an electrical output of 800 kW and a thermal power of 760 KW. At the biogas plant in Trechwitz, an unconventional heat utilisation model was installed. The waste heat from the CHP unit is used to generate power in an ORC unit (Organic Rankine Cycle). The heat goes into an evaporator, and the operating liquid is converted into pressurised steam. The steam is depressurised by ...

  • Case study - ElectraTherm’s green machine operates in tandem with small steam engine to double power output and increase efficiency

    Niedersachsen, Germany IC Engine: 635kW GE Jenbacher Hot Water Temp:  90°C Hot Water Flow:  10-11 l/s kWth Average (Thermal Input): 550-600kWth Cooling:  Air Cooled Condenser Ambient Temp: 5-30°C Green Machine Average Gross Output: Up to 35kWe, and up to 67kWe combined with Steam Engine ElectraTherm, a leader in small-scale, waste heat-to-power ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Organic Rankine Cycle (ORC)

    Biogas/Heat-to-Power Application using a Dreyer & Bosse CHP power unit Location: Trechwitz, Germany Site Gross Power Output Range 500Kwe + 30-35kWe from Electratherm ORC Thermal Heat Input Range: ?375-450kWt   Hot Water Input Range:? 90-95°C ...

  • Greenstars portable monitoring for CHP and flares case study

    Greenstar's award-winning KTK landfill site in Kilcullen, Co. Kildare, is unusual in Ireland in that it has three gas engines feeding electricity to the grid and two flares. In Ireland, while flaring is common, engines are not. The flares are run in tandem with engines so that if an engine is ramped down for repair or service, the flare ramps up automatically. All are supplied by 122 landfill gas ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you