boiler cleaning Articles
-
Värnamo, Boiler 1- E.ON, Sweden - Case Study
Mounting of an AEROVIT system August 2005 Before the boiler had to be cleaned every 6. week. The flue gas temperature was on a clean boiler 210°C. The manual cleaning was executed by ...
By Aerovit A/S
-
M.V. Split Vessel Case Study
The boiler had to be stopped for cleaning every 700-1000 hours of work, depending on the duration of the voyage. Upon arrival at ports, engine crew were busy with boiler cleaning, so they had less time for other necessary maintenance ...
By Aerovit A/S
-
Aerovit Installation - MV Split, Croatia - Case Study
The boiler had to be stopped for cleaning every 700-1000 hours of work, depending on the duration of the voyage. Upon arrival at ports, engine crew were busy with boiler cleaning, so they had less time for other necessary maintenance ...
By Aerovit A/S
-
Heating Plant Case Study
Mounting of an AEROVIT system August 2005. Before the boiler had to be cleaned every 6. week The flue gas temperature was on a clean boiler 210°C The manual cleaning was executed by 250°C. Evaluation of the AEROVIT systems effect From 28 Nov. 2005 to 28 April the boiler is running full load In that period the flue gas temperature increased by 30°C Without AEROVIT: Manual cleaning 6 ...
By Aerovit A/S
-
Aerovit Installation Vänersborg, Sweden - Case Study
Situation BEFORE Aerovit Installation In 2011, Vattenfall Vänersborg installed 2 pcs of 15MW boilers (bio-oil) supplied by Compab in cooperation with Robert Bosch A/S. During the heating season December-March the boilers needed to be cleaned manually 3 times. Meaning a 2-days shutdown every time. Vattenfall wanted to eliminate the manual cleanings during the heating season and therefore ...
By Aerovit A/S
-
How To Prolong The Life Of Your Boiler
Regularly boiler maintenance will prolong the life of your boiler and improve efficiency, saving you money. Over the years sludge can build up within the system making it work harder, causing it to be inefficient and expensive to keep. A planned maintenance will flush the system, removing the sludge and other deposits, your gas engineer will also treat the boiler. Flushing a new system will also ...
-
How to prolong the service life of biomass fired boiler
Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: Biomass fired boiler cleaning Open the door of burner,remove the rear ...
-
Aerovit Installation - Orlén Refinery, Lithuania - Case Study
Situation BEFORE Aerovit Installation Orlen Lietuva Refinery has two boilers which are losing a considerable amount of heat due to catalyst dust build-up in the tubes. After two month of operation the boilers tubes are fully covered by catalysts dust, but Orlen ´s technicians cannot stop them for manual cleaning because it would imply the whole refinery to shut down. The diagram shows ...
By Aerovit A/S
-
Chemically Inclined: The Case for Clean Boilers
Boiler cleaning is something most companies don’t want to think about — if boilers are working within operational limits it’s often easier to keep up with smaller preventative maintenance (PM) tasks but put off a total chemical clean until performance starts to suffer. The problem? Once scale forms on boiler surfaces both fuel and efficiency losses quickly ramp up. Here’s ...
-
Dry ice widely used in many fields to keep fresh & cold
Dry ice is solid CO2 -carbon dioxide with temperature of -78.5 degrees. In our life, we often see it, and the application field of dry ice is also very extensive. Following Qingdao Newtep will explain the application of dry ice in various fields: 1. Food industry Because of its extremely low temperature, dry ice can be used as refrigerant to preserve food and seafood transported by cold chain. ...
-
Soot-Blowing Equipment Hasselager, DK Case Study
With several years of experience with AEROVIT soot-blowing equipment and more than 400 installed. AEROVIT systems, we have collected a number of case stories from our many satisfied ...
By Aerovit A/S
-
Oil Refinery, Russia - Case Study
Situation BEFORE Aerovit Installation. The diagram shows the steam production of one boiler. Right after the manual cleaning session the steam production is about 18t/h, then after 2-3 weeks decreasing to 11-12 t/h. The final result of the dust accumulation process is a critical reduction of the steam production, which after approximately two months of operation decreases drastically where the ...
By Aerovit A/S
-
Case study - Decorpanel opts for Mawera biomass solution
With six Homag beam saws, CNC drilling machines, CNC routing machines and edgebanders producing around 20 tonnes in off-cuts every week, Decorpanel of Hetton-le-Hole needed a boiler that would enable the company to utilise its waste fully and provide heating for the whole site. With the existing system out of action and a factory that was heated with gas and electric, Decorpanel’s Ian Ling ...
By Mawera
-
Eco-Friendly Thinking: Heating Your Home and Water With Biomass Fuel and Appliances
With today’s struggles with carbon footprints, pollution, and finite energy sources, people are becoming more environmentally conscious. And if you’re thinking of transforming your home into a more eco-friendly structure, there’s a lot to consider. If you want to stray from your oil, gas, or electric heating system, consider investing in a biomass heating system for a more ...
-
Slag costs the power industry billions $ per year
You’ve Heard Of Coal. Ever Hear Of Slag? Globally coal is continuing to serve the modern and developing world’s energy interests. Any energy expert will tell you the power and influence of Coal on the power sector is undeniable. Coal is cheap, abundant and available to developing countries that intend to utilize it. Coal will remain popular in coal dependent Asian countries like ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you