boiler compliance Articles

  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • Boiler mact compliance at Boise Wallula case study

    Lundberg Helped Boise Wallula Reduce Emissions with a Geoenergy E-Tube WET ESP A major pulp and paper supplier in the northwest was in need of a cost effective solution to reduce their particulate emissions from a biomass fired boiler. Lundberg provided a Geoenergy Wet ESP to meet their needs. The result was a ten fold decrease in particulate emissions and they now meet current Boiler MACT ...


    By Lundberg, LLC

  • Major Source Boiler MACT Compliance with Oxygen Trim Systems

    The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters promulgated at 40 CFR Part 63, Subpart DDDDD, commonly referred to as the Major Source Boiler MACT (MSBM) standards, provide multiple continuous compliance options that require monitoring.  Among these options is the use of a ...


    By All4 Inc.

  • Hurricane HR cyclone system to reduce particulate matter emissions from a 600Hp biomass boiler burning bark - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System for KMW Energy, an engineering consulting company and equipment manufacturer of biomass energy solutions from Ontario, Canada. The system was installed at Les Produits Forestiers D&G in Quebec, Canada. Les Forestiers D&G runs a softwood lumber processing plant ...

  • Hurricane MK cyclone system for PM emission reduction on a 2.5MWth biomass boiler at Britton Timbers. (8 760m3/h at 328°C) - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System type MK for particulate matter reduction from the flue gas of a biomass boiler in Australia. The boiler was installed at Britton Timbers, a diversified company with interests in timber harvesting, sawmilling, international timber import and export, and distribution. From humble ...

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • Innovative Solutions for the Power Generation Industry

    The global demand for power continues to increase, especially in fast growing areas of Asia including China, India and the Middle East. The environmental regulations on these power generation companies are also becoming more stringent. Power generation companies need smart, sustainable solutions to meet the specific water quality requirements that will ensure consistent process and power ...

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Energy efficiency in U.S. manufacturing: the case of Midwest pulp and paper mills

    Rising international energy and labor costs are combining with historically low natural gas prices and improving productivity in the U.S. to create an intermittent resurgence of American manufacturing. In a 2012 survey of company decision makers, the Boston Consulting Group found that 37 percent of manufacturers with sales greater than $1 billion were planning to bring back production to the ...

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Building Energy Management Systems (BEMS) Frequently Asked Questions

    The Building Energy Management Systems (BEMS) sector is growing as organisations realise that BEMS are one of the most effective solutions for optimising efficiency in a building - providing the quick win that organisations are seeking. Energy managers and building owners might have ...


    By ENER-G

  • Case study - WESPs: Securing a cleaner future for power-generating facilities

    This article explains why wet electrostatic precipitators remain a viable technology for dealing with today's increasingly stringent compliance issues. Despite recent, recession-related volatility in both power generation and consumption, industry analysts expect a resumption of long-term growth trends as continued global demand for energy — in both developed and developing nations ...


    By Beltran Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you