boiler pump Articles

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • How To Prolong The Life Of Your Boiler

    Regularly boiler maintenance will prolong the life of your boiler and improve efficiency, saving you money. Over the years sludge can build up within the system making it work harder, causing it to be inefficient and expensive to keep. A planned maintenance will flush the system, removing the sludge and other deposits, your gas engineer will also treat the boiler. Flushing a new system will also ...


    By Waltham Technologies, Inc.

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • The solutions of industrial hot water boiler water evaporation

    When the water evaporation of industrial hot water boiler occurs,we should actively looks for the reasons and the corresponding solutions to extend its thermal efficiency. In the last article,the reasons of industrial hot water boiler water vaporization have been analyzed,after consulting the engineers of Zhengzhou Boiler Co., Ltd,this text will introduce the ...

  • Norwich - open vent boiler case study

    Customer: Malcolm Robinson Location: Norwich, Norfolk Heating System: Open Vent Glow Worm 85-100 Boiler Installed: 11/09 This is a spacious four bedroom detached house, which was built in 1979. The owner installed a Vortex in November 2009 and compared his energy bills from winter 2008-2009 (pre Vortex) against winter 2009-2010 (with Vortex). The heating for ...


    By Vortex Energy Saver

  • Nottingham - Condensing Combi-Boiler case study

    Customer: Mr Tony Goodyear, Heating Engineer Location: Nottingham Heating System: Gas Condensing Combi Boiler installed: 08/07 Problems: New condensing boiler fitted within the past 12 months had failed to rectify noise from pump and problems with air present in ...


    By Vortex Energy Saver

  • Case study - Be modern invest in biomass boilers

    As one of the UK’s largest fireplace manufacturers and suppliers of bathroom furniture, Be Modern is an established Group of Companies based in the North East that employs over 350 skilled workers. Established in 1964 the group supplies products across the UK to a wide and diverse customer base as well as exporting products across Europe. With over 500,000 square foot of manufacturing ...


    By Mawera (UK) Ltd

  • Pumps for synthetic heat-transfer liquids

    As soon as the temperature in a heat-transfer system becomes too high for water, a plant operator must choose between petroleum-based or synthetic oils as the heat-transfer liquid. When modern petroleum oils are used, systems with feed temperatures up to about 300 °C can stay in service for their entire service life with one filling and with virtually no maintenance. Once feed temperatures ...


    By ALLWEILER GmbH

  • 24kW Ground Source Heat Pump In Essex - Case Study

    The space heating and hot water for this property was previously done by an oil boiler. The client was considering a ground source heat pump in order to lower running costs and benefit from tariff payments under the Renewable Heat Incentive (RHI). Better Planet carried out a room by room heat loss calculation. This is required in order to size the heat pump ...


  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By AADHUNIK GLOBAL ENERGY

  • Allready-Box brings security to production of bioenergy

    Animal feed manufacturer Futtertrocknung Mindelheim eG of southern Germany has been operating a co-generation power station since 2008. During the summer months, this power station uses ecological methods to generate the heat and electricity the company needs to dry soilage. Utilizing a year-round, low-temperature heating network, it supplies local industrial firms and public institutions with ...


    By ALLWEILER GmbH

  • First industrial application of an open absorption cycle for heat transformation in a district-heating network

    The first plant for high temperature utilisation of higher heating value was realised under industrial conditions in a combined heat and power plant. The technology results in an increased heat recovery temperature and a stronger dehumidification of the flue gas. Beyond that, the use of large solution flow within an adiabatic absorber enables to combine gas scrubbing and dehumidifying. Economic ...


    By Inderscience Publishers

  • Eco-Friendly Thinking: Heating Your Home and Water With Biomass Fuel and Appliances

    With today’s struggles with carbon footprints, pollution, and finite energy sources, people are becoming more environmentally conscious. And if you’re thinking of transforming your home into a more eco-friendly structure, there’s a lot to consider. If you want to stray from your oil, gas, or electric heating system, consider investing in a biomass heating ...


    By Uzelac Industries, Inc

  • Heather glen country house hotel – renewable energy advice case study

    Background Heather Glen Country House Hotel in Cumbria was undertaking a major extension and alterations to the premises and sought advice from Envirolink Northwest on how to make energy improvements. Envirolink Northwest recommended a switch from LPG to a renewable biomass fuel, which was followed by assistance with an application for a local grant to help with the cost. The grant was ...


    By Envirolink Northwest

  • Biogas cleaning / conditioning - A requirement for optimal functioning of CHP systems

    Biogas is obtained through the anaerobic decomposition (putrefaction) of organic matter. It contains methane (CH4) in varying proportions, ranging from 35% to 70%, a proportion which largely depends on production methods and the materials involved in the process. This methane concentration is what enables biogas to be used as fuel. The release of methane into the atmosphere contributes to an ...


    By Energy & Waste S.l

  • Wind Generators as Role Models

    Advanced speed control methods are available for the regulation of wind generators. Working together with SET Sustainable Energy Technologies GmbH, Sulzer made use of one of these new concepts on pumps for the first time and implemented it with great success on a feedwater pump in a refinery. Unregulated pumps consume unnecessary drive energy when demand fluctuates. By controlling ...


    By Sulzer Management Ltd

  • Get more Bang for your Buck with Solar Thermal!

    The relative efficiency of renewable energy technologies – i.e. their ability to transform solar or wind energy into electricity and heat – is a key element in calculating the likely effectiveness and expected ROI of renewable installations. Recently published research shows that solar thermal technology is more efficient than any other renewable system. According to the latest ...


    By Kingspan Environmental Ltd

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Harbin daoli - District Heating, China case study

    In cooperation with ABB A/S Skovlunde and APV A/S Kolding DESMI A/S replaced large parts of the heating network in Harbin in China. Daoli is one of the seven districts of Harbin, the largest city in North East China with approx. 11 million inhabitants. It is known for its bitterly cold winters and is often called the “Ice City” – so therefore the city welcomed this ...


    By DESMI A/S

  • Cogeneration Renovation of Cofely`s Saint Quentin Installation - Case Study

    In 2012, Cofely’s Picardie branch, the site’s exploiter, entrusted the renovation of a cogeneration installation in Saint Quentin, in the Aisne province, to Clarke Energy. Initially, this “boiler room” consisted of a turbine installed in a soundproof enclosure. Cofely could either renovate ...


    By Clarke Energy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you