boiler temperature Articles
-
Kinetics of forming the nitrogen oxides and other harmful substances in catalytic power plants
In the following paper, the kinetics of forming nitrogen oxides and other harmful substances in catalytic power plants are described. First of all, the equilibrium NOx concentrations are considered. The discrepancy between equilibrium concentrations and real results on NOx in the case of flame combustion are explained by a short duration of fuel-air mixture stay in furnace space. The positive ...
-
Energy and exergy analysis of a 16–MW combined cycle district heating system with performance improvements
Results of an energy and exergy analyses performed on a 16–MW University district heating plant located in the Northeast USA are presented in this paper. Unlike past studies, this paper uses actual data to assess CHP plant performance for all the 8760 h in a year (2011). A system of such complexity, considering the large volume of data available and large variations in system load, has not been ...
-
Influence of reference temperature on exergy and exergoeconomic performance of a natural gas fired thermal power plant
The influence of reference temperature on exergy and exergoeconomic performance parameters of a thermal plant was investigated. The plant was simulated using HYSYS (2003) process simulator software and the exergy and exergoeconomic analyses were done using Microsoft EXCEL spreadsheet. As reference temperature increased from 15°C to 35°C, exergy efficiency decreased from 11.7% to 11.5% and ...
-
Gas boiler load optimisation controls can rectify dry cycling and reduce energy costs by 25%
Dry cycling of gas boilers can waste a great deal of energy, even when BMS optimisation is in use. Installing gas boiler load optimisation controls can reduce this waste and help boilers run more efficientlyBuilding engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and ...
By Vital Energi
-
Rectify dry cycling of gas boilers and reduce energy costs by 25%
Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...
By Vital Energi
-
What Are Fire Resistant Bricks?
Introduction Fire resistant bricks, also known as refractory bricks, are essential materials designed to withstand extreme temperatures and challenging conditions in various industrial applications. These specialized bricks are engineered to provide exceptional thermal stability, high heat resistance, and resistance to thermal shock, making them a reliable choice for environments where standard ...
-
E.ON Benelux power station Maasvlakte, Rotterdam - Case Study
Next Generation Power Production E.ON’s new Maasvlakte power station also known as MPP3 is built in the harbour of the Dutch metropolis Rotterdam. The modern supercritical hard coal fired unit with a capacity of 1100 MW is expected to have a thermal efficiency of more than 46 percent. The new plant built in the vicinity of the existing Maasvlakte station is designed as cogeneration plant ...
-
Why President Obama’s better buildings initiative doesn’t work for multifamily
You might think by this headline that I’m about to rant about the news regarding energy efficiency policy that was circulating last week. President Obama outlined a plan called the Better Buildings Initiative to incentivize energy efficiency in commercial buildings during his visit to Penn State. Actually, I want to explain why multifamily energy management struggles with this type of ...
-
Slag costs the power industry billions $ per year
You’ve Heard Of Coal. Ever Hear Of Slag? Globally coal is continuing to serve the modern and developing world’s energy interests. Any energy expert will tell you the power and influence of Coal on the power sector is undeniable. Coal is cheap, abundant and available to developing countries that intend to utilize it. Coal will remain popular in coal dependent Asian countries like ...
-
Beef Processing Plant Case Study | Stack Economizer
Project Overview A beef processing plant has recently partnered with Kemco Systems to recover heat exhaust from its facility’s water-sanitization boilers. Priding itself on a sustainable mindset and strict operational standards, the beef processing company reached out to Kemco through a channel partner. This company was seeking updated equipment to continue production of the highest-quality ...
-
How Tyre Pyrolysis Plants Are Helpful
A tyre pyrolysis plant uses an industrial method that converts used tyres into liquid fuel, including oils and gases.There are 2 forms of processes utilized: direct and indirect. In a direct process, the rubber is heated within an oxygen-free environment at 300 to 600 °C for a number of hours, inducing the hydrocarbon chains inside the tyre to interrupt into smaller pieces. A byproduct with this ...
-
Värnamo, Boiler 1- E.ON, Sweden - Case Study
Mounting of an AEROVIT system August 2005 Before the boiler had to be cleaned every 6. week. The flue gas temperature was on a clean boiler 210°C. The manual cleaning was executed by ...
By Aerovit A/S
-
Hydropower: Why Use Thermal Insulation in Hydroelectric Plants?
Thermal insulation is a means of stopping heat transfer from one object to another. It is usually used to decrease levels of heat transfer via conduction, requiring objects to be in direct contact, and can also be used to prevent heat transfer via radiation. Thermal conductivity of materials determines the rate of heat transfer between objects. Ceramics and metals which have high thermal ...
-
Heating Plant Case Study
Mounting of an AEROVIT system August 2005. Before the boiler had to be cleaned every 6. week The flue gas temperature was on a clean boiler 210°C The manual cleaning was executed by 250°C. Evaluation of the AEROVIT systems effect From 28 Nov. 2005 to 28 April the boiler is running full load In that period the flue gas temperature increased by 30°C Without AEROVIT: Manual cleaning 6 ...
By Aerovit A/S
-
Attention to the use of steam boilers in the industry
In the industry, if people need to use high-temperature steam , then the steam boiler will be used; water can be heated to a quite high temperature, and generates high-temperature steam . Steam boilers and other hot water boiler are not the same , if people want to use the steam boiler, the boiler must be certified , or else once operated wrongly , then the consequences are very terrible. Steam ...
-
High Accuracy Temperature Profilingon Tangential Boiler - Case Study
Dongshen Power Station, China. 1 x 300MW Tangential Coal-Fired Boiler. Boiler supplied by Shanghai Boiler Works (China). 12 Oil igniters, 20 Main oil burners, 12 Observation Ports were used to view inside the ...
-
Reflective radiator panel case study
Installed Measures: Supply and installation metallised saw tooth radiator panels installed behind each radiator to reflect heat from the back of the radiator eliminating loss through the wall and increasing the running temperature of the radiator resulting less fuel used the retain the centre point temperature of the room. History: This process is where Environment 2000 began its journey down ...
By Elite Energy
-
Mawera Inside Story – Biomass - Case Study
With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...
By Mawera
-
How Tyre Pyrolysis Plants Are Useful
A tyre pyrolysis plant uses an industrial procedure that converts used tyres into liquid fuel, such as oils and gases. The two main varieties of processes utilized: direct and indirect. In a direct process, the rubber is heated in a oxygen-free environment at 300 to 600 °C for a lot of hours, inducing the hydrocarbon chains inside the tyre to get rid of down into smaller pieces. A byproduct ...
-
How to prolong the service life of biomass fired boiler
Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: Biomass fired boiler cleaning Open the door of burner,remove the rear ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you