burner Articles
-
Thermal design and emissions of duct-burners for combined-cycle and cogenerative plants
This paper mainly aims at demonstrating that an appropriate thermo-fluid-dynamic design optimisation of duct-burners for combined-cycle and cogenerative plants allows to satisfy restrictive emission limits, while significantly reducing the thermal stresses and the undesired pressure drops. In particular, a detailed discussion on the influence of the TEG composition and of the thermal load, ...
-
Modification of Competition - Designed Enclosed Combustor - Case Study #170402
Project Details Location: Rosa, CA & Dexter, MI Max Heat Release: 2.4 MMBTU/HR Application: Food Services (Brewery) Customer purchased a flare system designed by a competitor, and upon installation, determined that they had issues lighting the burner. Detailed analysis of the design revealed that the burner design was not appropriate for the application. AEREON’s Service & ...
-
Vortex structure and heat transfer in a diffusion combustion field with circulating flow
A numerical study was performed to examine the vortical structures for combusting flow from a two-dimensional bluff-body slot burner in the transitional recirculating flow. The numerical results support the flow visualisation results for C3H8 combustion by Chin and Tankin [Chin, L.P. and Tankin, R.S. (1991) 'Vortical structures in a 2-d vertical bluff-body burner', Combustion Science and ...
-
WIRAJASA Waste Oil Burner
Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...
-
Efficient catalytic combustion with eco-burner Chafo systems
Established in 2004, eco-burner Ltd has revolutionized the chafing fuel industry by offering the ultimate solution to traditional gel and wick heat sources; the refillable Chafo. Safer, cleaner and greener than it’s alternatives, the Chafo is innovative and a game changer in the catering industry. The company is headquartered in Waterford, Ireland, which is the manufacturing and sales hub ...
By Catator AB
-
Evaluation of the optimum efficiency of fire tubes boilers
Three-stage pirotubular boilers using gasoil C have been studied. Two boilers were connected in parallel. The data has been obtained by means of an analyser; its probe was connected at the exit of the boilers. The operation parameters considered were the injection pressure and the number of burners. As the emission of pollutants must be within the values prescribed by legislation, these are ...
-
The Nitrogen Experts - success factors
Employees Highly experienced: our employees average 14 years of nitrogen pumping services Equipment Incorporates the latest technology available Meets high standards of quality, maintained in-house Offers both heat recovery and burner units Management Committed to providing the best training possible Dedicated to the highest safety standards Responsive to industry changes ...
-
Development of an energy efficient curtain flame ignition system for sintering of iron ore fines
Research and Development Centre for Iron and Steel (RDCIS) of Steel Authority of India Limited (SAIL) has developed a 'curtain flame' ignition system for sinter mix ignition. Conventionally, either horizontal fired burners or top fired or a combination of both are used for ignition of sinter mix. These burners big in size but few in number are mounted on a rectangular box type furnace. This is ...
-
Global Servicing Network
Inciner8 have recently completed the annual servicing of a number of machines located in rural areas of Pakistan. Our engineers were on-site for 7 days and carried out routine quality inspections and the replacement of consumables. The annual service usually comprises of replacing the fire ropes on all apertures and openings, replacing burner consumables (nozzles, hoses) and replacing ...
-
Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen
Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...
-
Charles Darwin High School Contract Report Case Study
A no obligation survey was performed free of charge to determine how efficiently the plant was operating. A report was provided to the school outlining efficiency and emissions levels, highlighting where savings could be made and recommendations to achieve the savings. Based on the information collected during the survey, a quotation was prepared for the customer. This included the supply of 3 ...
By Limpsfield
-
High Accuracy Temperature Profilingon Tangential Boiler - Case Study
Dongshen Power Station, China. 1 x 300MW Tangential Coal-Fired Boiler. Boiler supplied by Shanghai Boiler Works (China). 12 Oil igniters, 20 Main oil burners, 12 Observation Ports were used to view inside the ...
-
5000Nm3/h HT Flares in Sao João, Brazil
Type HOFGAS®-Efficiency 5000 Performance 3x 5,000 Nm3/h, 75,000 KW Location Sao João (BR) Technical requirements Surplus combustion of 15,000 Nm3/h landfill gasCompliance with the UNFCCC regulationsHigh temperature combustion at 1,000-1,200°CHolding time ≥ 0.3s HOFSTETTER solution concept Use of 3 HOFGAS®- Efficiency 5000 high temperature flares. These are the largest ...
-
SOCAVER Thermal Gas Supply - Case Study
SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...
-
Firecat Incinerator - Case Study #170701
PROJECT DETAILS Location: Kuwait Equipment Type: Vertical Forced Draft Incinerator Type of Gas: Tail Gas Capacity: 270MMBTU/hr (79MW) Burner Type: Forced Draft Staged Burner Tail Gas Capacity: 273,000 lb/hr (12,390 kg/hr) Dimensions: 20 ftOD x 110 ft (6 m x 33 m) Install Year: 2017 Aereon’s FIRECAT Forced Draft Vertical Incinerator is here used to incinerate tail gas at ...
-
Client - Oil Refinery, Eastern Europe
Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe based oil ...
-
Gas Fired Oven
INDUSTRIAL GAS FIRED OVEN CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation. The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from oven chamber to the exterior surface. ...
-
‘The Sirocco’ the Green Heat Burner
The global leaders in incineration and product development have once again, following demand from our customers, developed and are proud to announce ‘The Sirocco’ the Green Heat Burner. We are delighted to bring this revolutionary and much-desired product to the market. ‘The Sirocco’ supports the requirements of destroying waste at source, removing the risk of onward ...
-
The Sirocco the Green Heat Burner
The global leaders in incineration and product development have once again, following demand from our customers, developed and are proud to announce The Sirocco' the Green Heat Burner. We are delighted to bring this revolutionary and much-desired product to the market. The Sirocco' supports the requirements of destroying waste at source, removing the risk of onward contamination both efficiently ...
-
Experts in combustion control - Expert Paper
Fired heaters are integral to hydrocarbon processing (HP). Specifically designed for the reaction of fuel and air to produce extremely high gas temperatures, heaters transfer this energy to potentially highly flammable process fluids via heat exchangers. They consume large quantities of fuel, produce large quantities of emissions and are a potential safety hazard to personnel and plant. However, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you