burner fuel Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Additives mixing effect fuel consumption

    Additives are an instrument of fuel operational development properties which can’t be provided with the previous stages of fuel producing. They lead to product correction, instead of participate in the main method of production. Their efficiency is caused by chemical structure, structure of a basic base, mutual influence and additives mixing process. Improvers which affect some parameters ...


    By GlobeCore GmbH

  • Additives mixing effect fuel consumption

    Additives are an instrument of fuel operational development properties which can’t be provided with the previous stages of fuel producing. They lead to product correction, instead of participate in the main method of production. Their efficiency is caused by chemical structure, structure of a basic base, mutual influence and additives mixing process. Improvers which affect some parameters ...


    By GlobeCore GmbH

  • Fuel inefficiency frozen out at Findus

    The installation of the proven Maxsys Fuel System at the Benton Lane, Newcastle plant of Findus has reduced the natural gas consumed by its three boilers by 6.6%. This substantial saving will allow the company to recoup the outlay on its investment within an impressively brief 12 month period. Findus is a household name in frozen food. Few can claim never to have ...


    By Maxsys Fuel Systems Ltd

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • Vortex structure and heat transfer in a diffusion combustion field with circulating flow

    A numerical study was performed to examine the vortical structures for combusting flow from a two-dimensional bluff-body slot burner in the transitional recirculating flow. The numerical results support the flow visualisation results for C3H8 combustion by Chin and Tankin [Chin, L.P. and Tankin, R.S. (1991) 'Vortical structures in a 2-d vertical bluff-body burner', Combustion Science and ...


    By Inderscience Publishers

  • Focus Bioenergy No 7 2004: Biofuels - heating for the future

    Biofuels for heating of homes and properties is rapidly making headway. Environmentally friendly, comfortable and price-worthy small-scale heating with biofuels is done using pellets or briquettes. Changing an oil burner for a pellets burner or replacing electric heating with a pellet-burning stove is often very profitable. It demands less effort than wood firing but somewhat more work than using ...


    By Elmia AB

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Pollution reduction from flares by swirl vanes in a cross-flow

    The effect of swirl on the performance of a flare stack was experimentally investigated as a passive control technique for combustion in a cross-flow. The burner comprised a circular fuel nozzle with a co-annular airflow, swirled by a concentric vane swirler, with a crosswind of air at the flare tip. It was found that the flames issuing from swirl-vane flare tip were shorter and had wider flame ...


    By Inderscience Publishers

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • Client - Oil Refinery, Eastern Europe

    Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe ...


    By Econotherm UK Ltd

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • oil fired boiler price in South Africa

    oil fired boiler price in South Africa  ...


  • Zoo-technical application of Ground Source Heat Pumps: a pilot case study

    Ground Source Heat Pumps are energy-efficient HVAC systems usually adopted in residential and commercial buildings. However the control of the thermal environment is required not only in spaces occupied by people, but also in intensive breeding farms, in order to maintain healthy conditions and to increase productivity. In the Italian livestock breedings, heating is usually provided by means of ...


    By Tethys srl

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you