burner system Articles

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Development of an energy efficient curtain flame ignition system for sintering of iron ore fines

    Research and Development Centre for Iron and Steel (RDCIS) of Steel Authority of India Limited (SAIL) has developed a 'curtain flame' ignition system for sinter mix ignition. Conventionally, either horizontal fired burners or top fired or a combination of both are used for ignition of sinter mix. These burners big in size but few in number are mounted on a rectangular box type furnace. This is ...


    By Inderscience Publishers

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • Optimizing The Operation And Material Selection For Fluorinated Waste Gas Incineration

    A thermal oxidizer system is used by Honeywell Specialty Chemicals to reduce organic and acid gas emissions from their fluoro-products plant. The thermal oxidizer system consists of a multi-gas fired vortex burner mounted on a vertical residence chamber. ...

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • Gas Fired Oven

      INDUSTRIAL GAS FIRED OVEN   CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation.  The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from ...


    By Epcon Industrial Systems, LP

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Redundant combustion plant for Novartis

    Type     HOFGAS®- IFM4c/2200/1500/60/180 Commissioning     2004 Site     Novartis (Basel, CH) Situation In order to prevent production failure due to missing redundancy in the flue gas clean up, Novartis required an additional system. During different production processes exhaust air load with organic components is formed. ...


    By Hofstetter BV

  • Several waste gas streams: Short, high concentration peaks and a constant medium concentration - Case Study

    Example: Production of synthetic resin Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics industry The production of high quality synthetic resin for marine paints and varnishes, coatings and repair materials, involves different waste gas streams. In addition to waste gas with a medium level of contamination, there is also a highly ...

  • 5000Nm3/h HT Flares in Sao João, Brazil

    Type      HOFGAS®-Efficiency 5000 Performance     3x 5,000 Nm3/h, 75,000 KW Location     Sao João (BR) Technical requirements Surplus combustion of 15,000 Nm3/h landfill gasCompliance with the UNFCCC regulationsHigh temperature combustion at 1,000-1,200°CHolding time ≥ ...


    By Hofstetter BV

  • `Must Do` Waste Oil Furnance Maintenance

    Recommendations to keep your waste oil burner running at peak performance and resistant to mechanical issues, including a list of typical standard maintenance measures. Getting into a scheduled maintenance routine and making sure you're keeping your furnace running smoothly will keep it generating free heat for your business for many years to come. Failure to maintain your waste oil furnace ...

  • 8 Types of Businesses that Can Save BIG with a Waste Oil Heater

    Besides the attraction of their environmentally-friendly attributes, waste oil heaters are emerging as a “must have” for certain types of businesses for an even more compelling reason: A waste oil furnace can literally convert an otherwise worthless by-product into substantial savings on energy costs. So, if you’ve got a business that generates used petroleum products in your ...


    By Clean Energy Heating Systems

  • E.ON Benelux power station Maasvlakte, Rotterdam - Case Study

    Next Generation Power Production E.ON’s new Maasvlakte power station also known as MPP3 is built in the harbour of the Dutch metropolis Rotterdam. The modern supercritical hard coal fired unit with a capacity of 1100 MW is expected to have a thermal efficiency of more than 46 percent. The new plant built in the vicinity of the existing Maasvlakte station is designed as cogeneration ...

  • APPLICATION OF H-VARB TECHNOLOGY TO IMPROVE COAL FLOW BALANCE AT NANTICOKE GENERATING STATION

    ABSTRACT The power generation industry is constantly challenged with the need to improve the emissions and heat rate performance of their assets. In the case of pulverized coal fired units, poor fuel balance at the burners is a relatively common issue that impedes efforts for combustion optimisation. The problem of fuel imbalance is particularly acute on units that employ splitting devices ...


  • Energy and exergy analyses of a sulphation unit in a powder detergent plant

    In this study, where the actual plant operational data were utilised, the energy and exergy analyses of a sulphation unit in a powder detergent plant with a production rate of 4400 kg /h, located in Izmir, were performed. The energy and exergy losses were determined in four components of the sulphation unit and the overall energy and exergy efficiencies were calculated as 73 and 56%, ...


    By Inderscience Publishers

  • 7 Questions You Should Ask a Waste Oil Furnace Salesperson Before You Buy

    As with any other business purchase, you should do your homework before making the decision to buy a waste oil furnace. Any open, honest salesperson from a reputable company will be happy to inform and educate you on what you can expect from installing a waste oil burner in your facility. Being in the know to make an empowered buying decision is your first step to gaining the cost-savings and ...

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you