burner temperature Articles

  • High Temperature Combustion of Biogas

    High Temperature Combustion of Biogas Efficient combustion of biogas Controlled and concealed combustion Combustion temperature > 900°C Residence time more than 0.3 s Insulated combustion chamber High safety standard The HOFGAS® - IFL4c high temperature flare provides safe and environmentally-friendly combustion of biogas. The exhaust gas ...


    By Hofstetter BV

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Intermediate Reynolds/Peclet number, flat plate boundary layer flows over catalytic surfaces for micro-combustion applications

    The reactive, flat plate boundary layer flow of close-tostoichiometric, methaneair mixtures over small size Pt plates is studied experimentally for intermediate Reynolds and Peclet numbers which pertain to micro-combustion applications. The surface temperature was measured with infrared thermography and correlated to reactant concentration profiles acquired with line-Raman imaging. Three phases ...


    By Inderscience Publishers

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Energy and exergy analyses of a sulphation unit in a powder detergent plant

    In this study, where the actual plant operational data were utilised, the energy and exergy analyses of a sulphation unit in a powder detergent plant with a production rate of 4400 kg /h, located in Izmir, were performed. The energy and exergy losses were determined in four components of the sulphation unit and the overall energy and exergy efficiencies were calculated as 73 and 56%, ...


    By Inderscience Publishers

  • Gas Fired Oven

      INDUSTRIAL GAS FIRED OVEN   CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation.  The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from ...


    By Epcon Industrial Systems, LP

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • 5000Nm3/h HT Flares in Sao João, Brazil

    Type      HOFGAS®-Efficiency 5000 Performance     3x 5,000 Nm3/h, 75,000 KW Location     Sao João (BR) Technical requirements Surplus combustion of 15,000 Nm3/h landfill gasCompliance with the UNFCCC regulationsHigh temperature combustion at 1,000-1,200°CHolding time ≥ ...


    By Hofstetter BV

  • Redundant combustion plant for Novartis

    Type     HOFGAS®- IFM4c/2200/1500/60/180 Commissioning     2004 Site     Novartis (Basel, CH) Situation In order to prevent production failure due to missing redundancy in the flue gas clean up, Novartis required an additional system. During different production processes exhaust air load with organic components is formed. ...


    By Hofstetter BV

  • E.ON Benelux power station Maasvlakte, Rotterdam - Case Study

    Next Generation Power Production E.ON’s new Maasvlakte power station also known as MPP3 is built in the harbour of the Dutch metropolis Rotterdam. The modern supercritical hard coal fired unit with a capacity of 1100 MW is expected to have a thermal efficiency of more than 46 percent. The new plant built in the vicinity of the existing Maasvlakte station is designed as cogeneration ...

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Cogeneration Helps Reduce Malting Costs: Adelaide Malting Pty Ltd

    Adelaide Malting is using natural-gas cogeneration as an energy-efficient alternative to electricity-powered malt drying technology. As well as replacing electricity as the power source, cogeneration has boosted plant capacity by 20 percent. Background Adelaide Malting, part of the Coopers Brewery Group of Companies, produces barley malt for the local, interstate and ...


  • Vattenfall`s Cogeneration Power Plant Reuter West - Case Study

    The cogeneration power plant “Reuter West” was erected as a base load power plant in the vicinity of the existing “Reuter” plant. The two hard coal fired 300 MW units D and E were commissioned in 1987 and 1989. Today the cogeneration units supplying electricity and thermal energy are operated by Vattenfall Europe GmbH. The heart of each power plant is the boiler where the ...

  • Case study - Maximizing heat recovery from your oxidizer and reducing operating costs

    More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. Below are ten tips to ensure your oxidizer is operating at peak performance. The first five tips focus on parameters end-users should know about ...

  • Gas boiler load optimisation controls can rectify dry cycling and reduce energy costs by 25%

    Dry cycling of gas boilers can waste a great deal of energy, even when BMS optimisation is in use. Installing gas boiler load optimisation controls can reduce this waste and help boilers run more efficientlyBuilding engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and ...


    By Vital Efficienci Ltd.

  • TPV History from 1990 to Present & Future Trends

    Abstract. Herein, the history of TPV at JX Crystals over the last 15 years is described. Our focus has been on commercial application for TPV components and systems. JX Crystals began as a spin off company when the inventors of the GaSb cell left Boeing with a license to make that cell at JX Crystals. We recosnized that III-V IR sensitive cells such as the GaSb cell were enabling for TPV systems. ...


    By JX Crystals

  • Rectify dry cycling of gas boilers and reduce energy costs by 25%

    Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...


    By Vital Efficienci Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you