combustion technology control Articles

  • A diesel compound HCCI combustion engine based on injection strategy control

    This paper presents a compound combustion technology of "Premixed Combustion" and "Lean Diffusion Combustion" for the purpose of realising the concept of homogeneous charge compression ignition (HCCI) combustion in a DI diesel engine. The premixed combustion is achieved by the technology of multi-pulse fuel injection. The start of pulse injection, injection-pulse number, injection period of each ...


    By Inderscience Publishers

  • Advances in control of PM2.5 and PM2.5 precursors generated by the combustion of pulverised coal

    Particulate matter smaller than 2.5 mm in aerodynamic diametre (PM2.5) from coal-fired boilers is composed of directly emitted (primary) particles and particles formed from precursors (secondary particles). Technologies to reduce emissions of precursors to secondary PM2.5 emitted by coal-fired utility plants include wet and dry flue gas desulphurisation (FGD). Limestone forced ...


    By Inderscience Publishers

  • Transportation and market feasibility analysis for innovative coal combustion by-products: WoodBrik in Greenbrier County, West Virginia

    This paper outlines a transportation and market feasibility study performed in support of Western Greenbrier Co-Generation, LLC's participation in the first Department of Energy Clean Coal Initiative. Western Greenbrier Co-Generation, LLC is a unique company formed by three local city councils to support the development of clean coal technologies in Greenbrier County, West Virginia. The study ...


    By Inderscience Publishers

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • The resurgence of waste-to-energy and conversion technologies: Where’s the risk?

    Waste processing technologies have come a long way in the last century. The technology to extract energy from the combustion of solid waste has been in use since 1898, when the first waste-toenergy (WTE) facility was built in New York. Since that time, WTE technologies have evolved from incinerators that were simply destruction units to large-scale mass-burn combustion and refuse-derived fuel ...


    By Waste Advantage Magazine

  • Fuel saving technology continues to cut automotive manufacturing

    Maxsys Ltd, the Walsall-based provider of the Fuel+ System is poised to further boost carbon reduction figures in the automotive industry, offering a guaranteed energy saving (on gas and oil) of at least 5% - a figure that translates into a significant benefit for large energy consumers in the sector. Emissions for vehicle production have reduced significantly since 2001, decreasing from 1.3 ...


    By Maxsys Fuel Systems Ltd

  • Emerging Technologies – How will they change our lives?

    Forward planning by governmental agencies is often criticized for being too focused on short term political mandate priorities.  A recent report by Policy Horizons Canada, a federal government agency, on emerging technologies is a refreshing change from that norm.  The report explored how emerging technologies will shape the economy and our society, and what challenges (and ...


    By GLOBE SERIES

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Tuning Your Boiler for Fuel Savings – Out with the Old in with the New Technology

    The USA has about 811,000 MW of installed generation and over 52% of our Electric power is produced by aging coal fired power plants. The average utility boiler furnace was designed about 30-40 years ago. According to DOE records, the average boiler in 1974 was fired with 80% bituminous coal. Now, western PRB coal is much more prevalent and represents about 50% of total coal ...

  • New Approach allows Subscribers to Reach the Summit of the Mountain of Information on Gas Turbine and Reciprocating Engine Technology

    The available information on combustion, flow control, treatment and environmental compliance for gas turbines and reciprocating engines is doubling every few years. It is now more challenging than climbing Mt. Everest to find the most current and relevant information. Rapid developments include zero liquid discharge (ZLD) technologies, repairable valves, high efficiency air inlet filters, ...


    By The McIlvaine Company

  • Gas boiler load optimisation controls can rectify dry cycling and reduce energy costs by 25%

    Dry cycling of gas boilers can waste a great deal of energy, even when BMS optimisation is in use. Installing gas boiler load optimisation controls can reduce this waste and help boilers run more efficientlyBuilding engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and ...


    By Vital Efficienci Ltd.

  • Vaporiser - Shandong LNG Terminal - Case Study

    Project Details Customer Name: Shandong LNG Terminal The Brief: Provide heat for regasification of LNG Location of Installation: Shandong, China Products supplied: 4 off Submerged Combustion Vaporisers (SCV) ...


    By Process Combustion Ltd

  • Developments in Auxiliary Power for Vehicles

    Fuel cells are widely recognised as a technology of the future and as a potential replacement for the internal combustion engine in cars and other vehicles.This article looks at the potential for fuel cells to provide auxiliary power to vehicles, rather than primary motive power. Today, hydrogen-fuelled proton exchange membrane (PEM) type fuel cells, as illustrated in Figure 1, are being ...

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • Case study - Be modern invest in biomass boilers

    As one of the UK’s largest fireplace manufacturers and suppliers of bathroom furniture, Be Modern is an established Group of Companies based in the North East that employs over 350 skilled workers. Established in 1964 the group supplies products across the UK to a wide and diverse customer base as well as exporting products across Europe. With over 500,000 square foot of manufacturing ...


    By Mawera (UK) Ltd

  • Source apportionment of PAHs into Central Park Lake, New York City, over a century of deposition

    Relative contributions of polycyclic aromatic hydrocarbons (PAHs) from combustion sources of wood, petroleum, and coal were computed in sediments from Central Park Lake (CPL), New York City (NYC) by chemical mass balance based on several reliable source indicators. These indicators are the ratio of retene to the sum of retene and chrysene (Ret/Ret + Chy), the ratio of 1,7‐dimethylphenanthrene ...


    By John Wiley & Sons, Ltd.

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Advanced, integrated systems meet the challenges of commercial-scale operation

    Technological frontiers in die alternative energy industry continue to widen in countries around the globe. As such, die exploitation of biomass as a source of energy has become die fastest-growing sector among a growing roster of energy solutions. Today, more energy is produced from various forms of biomass dian from all wind, solar and geodicrmal applications combined. Much of die excitement ...


    By Beltran Technologies, Inc.

  • The Diesel Engine and the Road Ahead – a US Perspective

    The diesel engine has become the workhorse of commercial transportation around the world and has had to adapt to different environments and various pressures throughout its history. It is now at the point where it has achieved excellent performance whilst maintaining its superior fuel economy and meeting ever-tightening emissions regulations. Contrary to common belief, diesel engines emit ...

  • Small-scale electricity production from biomass

    NC Service has set up the first plant of this type in Spain Thanks to the BIOCOM Project, Nicolás Correa Service, S.A. has built the first biomass combustion plant that not only produces thermal energy, but also electricity on a small scale (130 gross kWe). The process is based on the combustion of woodchips in a furnace to produce heat that is then transferred to an ORC module, where it ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you