district heating product Articles

  • District Cooling Project – NUON Energy

    Nuon, part of Vattenfall, is a leading energy company that generates electricity and produces gas, heating and cooling, which is supplies to approximately 2.2 million households, companies and organizations in the Netherlands. In 2009 DESMI supplied energy efficient pumps to Nuon for a district cooling project in the south area of Amsterdam. Capital Cooling from Sweden did the engineering. The ...


    By DESMI A/S

  • District Cooling Project – NUON Energy

    District Cooling Project – NUON Energy District cooling Zuidoost Lob Amsterdam Nuon, part of Vattenfall, is a leading energy company that generates electricity and produces gas, heating and cooling, which is supplies to approximately 2.2 million households, companies and organizations in the Netherlands. In 2009 DESMI supplied energy efficient pumps to Nuon for a ...


    By DESMI A/S

  • Los Angeles County Sanitation Districts: Siloxane Removal

    Los Angeles County Sanitation Districts have long been involved with recovering landfill and digester gas for energy to power turbines and internal combustion engines. Their experience led them to identify performance issues associated with these gases. One particular challenge is siloxanes. Cyclic organic silicon monomers (siloxanes) used in the manufacture of personal hygiene, health care and ...


    By Pioneer Air Systems

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Utilisation of deep geothermal energy for heating purposes

    The Hot-Dry-Rock-(HDR) technology allows a location-independent utilisation of geothermal heat, because aquifers in deep formations, i.e. layers filled with water, are not necessary. The flow paths for the circulating water in a depth of 4 km are created by hydraulic fracturing of existing gaps. Due to the fact that this new technology is quite cost-intensive, high annual load duration of the ...


    By Inderscience Publishers

  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Allready-Box brings security to production of bioenergy

    Animal feed manufacturer Futtertrocknung Mindelheim eG of southern Germany has been operating a co-generation power station since 2008. During the summer months, this power station uses ecological methods to generate the heat and electricity the company needs to dry soilage. Utilizing a year-round, low-temperature heating network, it supplies local industrial firms and public institutions with ...


    By ALLWEILER GmbH

  • Energy waste the size of Japan

    Here is a startling fact: US power plants waste more energy than many countries use, including advanced economies like that of Japan. The wasted energy is in the form of heat thrown off when power plants produce electricity. This is one of the points being brought to light by the International District Energy Association (IDEA), as it promotes new federal incentives for heat efficiency. While the ...

  • Focus Bioenergy No 3 2004: Forest industry - a major user and supplier of biofuels

    Forest industry is a major user and supplier of biofuels. Sawmills use bark and shavings internally as fuel. The surplus goes to district heating plants, production of refined biofuels and the board industry. Other residual products from the sawmills are chipped. The bulk, the damp chips, is used for paper pulp in the pulp industry, whereas dry chips go to the fuel sector. The pulp industry uses ...


    By Elmia AB

  • Focus Bioenergy No 6 2004: Waste - a source of energy of growing significance

    We have to use the earth’s resources sparingly. Waste products that society generates can be recycled or used as a source of energy. Heat and electricity from waste combustion and biogas from digestion contribute some 8 TWh annually in Sweden. Waste stands for about 2 percent of used fuels in Swedish district heating. The importance of waste will rise rapidly in the near future. The ...


    By Elmia AB

  • An anchor tenant approach to network management: considering regional material and energy flow networks

    In a similar way to several other areas of management, approaches to networking and network systems have received increasing attention in the literature on corporate or industrial environmental management. It has been acknowledged that the life cycles of products and their resource use, waste and emission generation are affected by or affect many different companies and other societal actors such ...


    By Inderscience Publishers

  • Case study: Maabjerg Bioenergy

    Substrate: Animal manure and food waste Biogas flow: 3.600 Nm3/h H2S Inlet: 3.000 ppm H2S Outlet: 80 ppm Year of installation: 2012 The Maabjerg plant is a collaboration between agriculture, municipalities and the district heat station and is situated in the northern part of Denmark. When in full ...


    By Biogasclean A/S

  • Efficiency Gain at FUSD

    Summary Power Knot treated a four ton (14 kW) roof-top packaged air conditioning unit with its Synthetic Refrigerant Additive (SRA) at the Mission Valley Elementary School in Fremont, California. After treatment, the efficiency of the unit increased by over 16%, resulting in savings in electricity cost and increasing the air conditioning cooling capacity for 32 students in their classroom. ...


    By Power Knot LLC

  • Energy efficiency highlights in transformation period and updating of energy policy of Poland up to 2005

    This paper presents some important macroeconomic components characterising the energy economy in Poland during the transition period 1995-2000. Evaluation of primary energy use in Poland has been made in two separate energy flows firstly, energy in the production sector and secondly, energy consumed by households. The comparison of energy productivity in Poland and the EU in 2000 shows 50% of ...


    By Inderscience Publishers

  • What 2017 holds for Energy from Waste in the UK

    The UK’s EfW industry has enjoyed two decades of stable investment under the public private partnership (PPP)/public finance initiative (PFI) regime. This has led to a reduction in the amount of biodegradable household waste sent to landfill via the construction of local authority-backed EfW plants and contributed to an increase in recycling rates by incorporating facilities that remove ...


    By GPT Waste Management Ltd

  • Life cycle assessment of a 150 MW offshore wind turbine farm at Nysted/Roedsand, Denmark

    The purpose of this life cycle assessment (LCA) was to illuminate and describe the potential environmental impacts caused by an offshore wind turbine farm (WTF) throughout its lifetime and use this knowledge in the planning and improvement of future WTFs. The LCA was based on experience from the LCA on Danish electricity and district heating [1] as well as the offshore WTF project at ...


    By Inderscience Publishers

  • Geothermal Energy... Power from the Depths

    The Earth's crust is a bountiful source of energy—and fossil fuels are only part of the story. Heat or thermal energy is by far the more abundant resource. To put it in perspective, the thermal energy in the uppermost six miles of the Earth's crust amounts to 50,000 times the energy of all oil and gas resources in the world! The word 'geothermal' literally means 'Earth' plus 'heat.' ...

  • Making environmentally friendly fuel from wood chips - Case Study

    The RUF briquetting press earns the Ortinger company additional profits During the production of round bars or rods for flags, skewers and many more products made from wooden planks, lots of wood chips are accumulated. Instead of disposing of them as waste, the wood processor Ortinger presses them into briquettes, which they then sell as fuel. This way they can economically support ...

  • A Cleaner Energy Future

    As renewable energy plays an increasingly important role in the world’s energy portfolio, the standards of ASTM International Committee E44 are helping to pave the way for innovation in clean energy sources. A growing population and improving living standards around the world are causing significant increases in energy demand and competition for fossil fuels. These escalating energy ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you