fast pyrolysis Articles

  • A comparison of fast and slow pyrolysis liquids from mallee

    An exploratory comparative study of the fast and slow pyrolysis of eucalyptus mallee has been carried out to explore the differences in liquid yields and characteristics. The study focused on the liquid products, which were fully characterised and good mass balance closures were achieved. The influence of temperature and heating rates on the slow pyrolysis of eucalyptus mallee was investigated, ...


    By Inderscience Publishers

  • Production and characterisation of bio-oil from biomass fast pyrolysis in a fluidised bed reactor

    Biomass fast pyrolyis in a fluidised bed reactor was carried out. Results showed that the highest bio-oil yield (62.39 wt%) was obtained from sawdust at 500?C. Bio-oil yield was influenced by biomass pyrolysis temperature from 450?C to 550?C, and maximum bio-oil yield of 53.33 wt% was achieved from pine sawdust with particle size less than 1 mm at 500?C. At 500?C, the bio-oil yield increased from ...


    By Inderscience Publishers

  • Biomass and Integration in Future Energy Systems and the Bioeconomy

    Biomass was the primary source of materials and energy until the industrial revolution set off a series of major changes around two hundred years ago. In the industrialized world fossil fuels became the primary source for energy in the forms of electricity and heat and provided almost all fuels for transport. However, biomass continued to maintain an important role in the economies in both ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you