flash point test Articles

  • Nuclear Industry Testing of PetroZorb Application

    The article describes application of PetroZorb microporous sorbent for application to the removal and disposal of radioactive liquids in the nuclear industry.  The material removes the presence of liquid, enabling the waste to be transported as a solid, and reduces the radioactive vapors to an acceptable level. Previous to this ...


    By Safety DImensions (SDI)

  • Evaluation of thermal steam-explosion key operation factors to optimize biogas production from biological sludge

    Thermal steam-explosion is the most extended hydrolysis pretreatment to enhance anaerobic digestion of sludge. Thermal hydrolysis key parameters are temperature (T) and time (t), and the generally accepted values reported from full-scale information are: 150–230 °C and 20–60 min. This study assesses the influence of different temperature–time–flash combinations (110–180 °C, ...


    By IWA Publishing

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Guide for Measuring Fuel Dilution in Lubricating Oil

    Fuel dilution in oil can cause serious engine damage. High levels of fuel (>2%) in a lubricant can result in decreased viscosity, oil degradation, loss of dispersancy, and loss of oxidation stability. Fuel dilution is one of the most important lubricant failure modes in internal combustion engines. It usually occurs due to ...


    By Spectro Scientific

  • Solar`s Time to Rise and Shine.

    Photovoltaic efficiency records are being shattered, thanks to recent advances in materials science. Last month, a researcher at the National Renewable Energy Laboratory in Golden, Colo., loaded a postage stamp–sized solar cell onto a tray and placed it under a high-intensity pulse solar simulator. The simulator flashed a 2.5 millisecond pulse of light, and 19 mirrors reflected the ...


    By Ensia

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you