Showing results for: flue gas treatment Articles
-
Atmospheric impact of a municipal wastes incinerator
This paper presents a case study of an air pollution dispersion model for the atmospheric impact assessment of a new municipal wastes incinerator (MWI). The capacity of the present MWI will increase more than ten times, and a new high-efficiency flue gas treatment system is projected. The environmental impact study has been focused on the long-term aspect of the air pollution (chronic pollution) ...
-
A STIEFEL project UTO Uvrier case study
The waste incineration plant UTO Uvrier is situated in the south western part of Switzerland. The Association which controls the plant was established in 1969 and treats waste from 44 municipalities with a combined population of 170,000 inhabitants. The principal task of UTO Uvrier is the thermal heat recovery from urban and industrial waste. Apart from this, UTO also treats other types of waste ...
-
A STIEFEL project KVA Linthgebiet Niederurnen case study
The waste incineration plant KVA Linthgebiet is situated in Switzerland. The plant disposes of a total of 120’000 tons of waste each year from 240‘000 inhabitants in the surrounding area. Due to the thermal recovery, it produces annually 84 GWhour of electrical energy and therefore saves 250’000 litres of fuel oil by providing energy to a district heating system. Background and ...
-
Shenzhen Waste Incineration Power Plant Leachate Treatment
Application: Landfill Leachate Scale: 1800 tons / day Process: Jiarong tubular membraneINTRODUCTIONProcessing scale: 1800 tons/day Treatment of sewage: landfill leachate Membrane type: M-C200-VFU100-08-3m The number of membranes used: 50 PCS Design membrane flux: > 65LMH Date of Completion: 2013We are a specialist in industrial membrane separation process. The core technology of Jiarong ...
-
Wet Rotary Kiln
Wet Rotary Kiln Overview The wet rotary kiln belongs to the category of building materials and equipment. It is widely used in metallurgy, chemical industry, building refractories, environmental protection, and other industries. The rotary kiln is composed of cylinder, supporting device, supporting device with baffle wheel, transmission device, movable kiln head, sealing device of kiln tail, ...
-
New horizons for sludge
Increasing production worldwide, higher cost for disposal, tighter restriction sludge management solutions are in high demand. New technologies are rapidly multiplying, fueled as well by sludge’s potential as a source of energy and potential for phosphorus recycling. Several drivers are contributing to the need for sludge solutions. A global population of 7.5 billion ...
-
Ningbo Incineration Power Plant Leachate Treatment Project
Capacity: 500tons/day Influent water quality: COD: 300-1000mg/L, BOD5: 20-300mg/L, SS: 500-800mg/L, NH3-N<=30mg/L, TN<=120mg/L, Total hardness(as CaCO3)<=1200mg/L, Total Alkalinity(CaCO3): 2000-8000mg/L Effluent water quality: CODcr<=60mg/L, BOD5<=10mg/L, pH: 6.5-8.5, Fe<=0.3mg/L, Total hardness(as CaCO3)<=450mg/L, Total Alkalinity(CaCO3)<=350mg/L Jiarong- ...
-
Waste-to-energy plant: ENVEA provides new generation of pollutants control systems - Case Study
Client: Waste-to-energy plant (France) Context: Upgrading of pollutants control systems Solution: A shelter gathering all analyzers and dioxin samplers The waste-to-energy plant in Evreux (France), which began operating in 2003, treats household residual waste and non-hazardous industrial waste from the south of the Eure, i.e. more than 200 municipalities. It belongs to the ...
By ENVEA
-
Waste-to-Energy plant (France) selects ENVEA for mercury monitoring and compliance with the waste incineration BREF - Case Study
The Waste-to-Energy (WtE) plant at Noidans le Ferroux (France) was commissioned in 2006 and belongs to SYTEVOM (Syndicat de Transfert, d’Elimination et de Valorisation des Déchets Ménagers) and is operated by Suez RV Energie. The plant treats 41,000 tonnes per year of household waste from the 280,000 inhabitants in the surrounding area and produces 17 GW of electricity for ...
By ENVEA
-
Producing fuels from waste: giving plastic waste a new life
There is a valorization process very much in demand nowadays, and that is waste-to-fuel. Waste-to-fuel is the transformation of waste into fuel, by means of pyrolysis. Pyrolysis is a common technique, designed for the thermal processing of waste to generate a usable by-product. The pyrolysis equipment consists typically of an externally-heated rotary kiln operated in the absence of oxygen. ...
By TECAM
-
The Other Side of Zirconium Oxide case study
Regular Fuel Efficiency Applications Separate Oxygen and Combustibles Sensors In standard flue gas applications for Thermox analyzers, the user generally tries to extract the maximum energy from the fuel and transfers as much of that energy as possible to the process. These applications require the process to be operated as efficiently as possible by keeping both oxygen (excess air) and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you