Showing results for: flue gas waste heat recovery Articles
-
Heat recovery from corrosive flue gas
For improvements to energy efficiency in the petrochemical industry, waste heat recovery from corrosive flue gas is the most cost effective source to exploit During the conversion of primary energy, approximately 5-10% of the energy used is lost via hot flue gas. There is no need to emphasise that significant savings are within reach when 60-70% of refining operational costs consist of energy ...
-
Rzeszow, Poland Project - Case Study
A new waste incineration plant in Rzeszów delivered by Termomecanicca / Astaldi consortium as a general contractor. It will be complemented by Radscan's installation. This is the first such a plant in Poland where waste incineration is combined with heat recovery by flue gas condensation. The delivery includes quench, and condenser. Montage start September 2017, take over May ...
-
Thermodynamic analysis of efficient recovery and utilisation of waste heat resources during sintering process
Efficient recycling and utilisation of waste heat resources are among the primary methods in saving energy during sintering process, as waste heat resource recycling and utilisation are essentially energy conversion process. The purpose of this study is to analyse energy conversion and utilisation during the sintering process, and waste heat resources in each subsystem during the sintering ...
-
QinetiQ – Modular EU Compliant incineration package - Case Study
TodaySure™ were commissioned to construct an Integrated Battlefield Support System Incinerator as part of a Ministry of Defence funded research programme, to demonstrate that waste management can be achieved in a responsible way, compliant with challenging environmental standards. Designed to meet the stringent requirements of the EU Waste Incineration Directive, the combustion chambers, ...
-
Kanodia Technoplast Trigeneration Plant, Haryana - Case Study
Kanodia Technoplast operates in flexible packaging. It’s a leading name in India offering integrated packaging solutions to the fast moving consumer goods (FMCG) and industrial segments. The company has been manufacturing laminated films, laminated pouches and engraved cylinders since 1995. The Kundli plant of Kanodia Technoplast has anindustrial trigeneration system installed using ...
-
Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo
Thermal Energy International Inc. (TEI) will be exhibiting its range of awarding winning energy efficiency products at stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October. TEI’s products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery economisers. Instead of utilising a valve mechanism to close off steam, the highly ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you