fuel analysis instrument Articles

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Case Study: Monitoring Fuel Treatment with On-Site Fuel Analysis

    Version 8 of our industry leading SpectrOil Optical Emission Spectrometers offers significant performance improvements and enhanced productivity. In particular the sensitivity of the instrument has been improved markedly to allow detection of trace metals down to the part per billion (ppb) level. This capability is particularly important to power generators using liquid fuel, as high levels ...


    By Spectro Scientific

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Lower Resolution Infrared (IR) Spectroscopy Can Provide Higher Performance for Quantitative Biodiesel Measurements

    Resolution is often used as a yardstick of instrument performance in Infrared Spectroscopy.  This is especially true when the measurements are energy limited as they are in the mid-infrared.  For example, in both the European and ASTM standards - EN14078 and ASTM D7371 - for the determination of biodiesel in diesel fuel, a 4 cm-1 resolution is specified which is a relatively high ...


    By Spectro Scientific

  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • A Cleaner Energy Future

    As renewable energy plays an increasingly important role in the world’s energy portfolio, the standards of ASTM International Committee E44 are helping to pave the way for innovation in clean energy sources. A growing population and improving living standards around the world are causing significant increases in energy demand and competition for fossil fuels. These escalating energy ...


    By ASTM International

  • Case study - Increasing primary heat recovery

    OVERVIEW Tekra Corporation is a custom coater of plastic films in Wisconsin, where state regulations require over 98% of the Volatile Organic Compounds (VOCs) emitted from their process be destroyed in an oxidizer system. While considering their first oxidizer system, Tekra's Engineers did their homework and invested in an early model Regenerative Thermal Oxidizer (RTO). While at the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you