fuel cell generator Articles
-
Electrocatalyst Studies: Enabling Next-Gen Fuel Cells
What is a Fuel Cell? Fuel cells generate electricity through an electrochemical reaction rather than combustion. Inside a fuel cell, hydrogen and oxygen are combined to generate heat, water and electricity. They represent a clean, efficient, dependable, and quiet source of power that does not need to be recharged, but can continue to produce electricity as long as fuel is ...
-
Fuel cell–based distributed generation system with power flow and power quality control
This paper presents the modelling and control of fuel cell–based distributed generation system with embedded active filter functioning. It includes the modelling of proton electrolyte membrane fuel cell and the power conditioning unit interfacing the fuel cell to the utility grid with proper power flow control. The output of the fuel cell stack is given to the DC–DC boost converter ...
-
Fuel cell technological innovation system in Iran
This article provides an overview of innovation processes have been taken in the field of fuel cell technology (FCT) in Iran. Fuel cell technology is a generic technology with wide variety areas of application in automobile and energy production both for industrial and residential purposes and also it is expected to have a large societal impact on the future society. In this article concerning ...
-
Fuel cell heating appliances field tests
The beginning of field tests with a new generation of fuel cell heating appliances (FCHAs) under the responsibility of Vaillant brings fuel cell technology for decentralized household energy supply into a new phase. The objective of testing the systems, which were developed in close cooperation with the US company Plug Power, is to examine how complexity and thus the systems' costs can be ...
-
Application of power electronics with the US DOE distributed generation programme
Power electronics play an important role in achieving affordable, highly fuel-efficient fuel cell power generation plants and will enable the US Department of Energy's Office of Fossil Energy Fuel Cells programme to achieve higher national goals: environmental, economic and energy security. The initial focus on power electronics has been to understand the interactions between the SOFC stack, the ...
-
Development of a generic fuel cell model: application to a fuel cell vehicle simulation
In this paper, a novel approach to fuel cell modelling is proposed. The model is obtained from manufacturer datasheets and is able to represent the behaviour of any hydrogen fuel cells. The simulation results are as expected with an error in the range of ±1%, provided a controlled stack internal humidity. The procedure to extract data from fuel cells datasheet is described along with the method ...
-
The isoengine: realisation of a high-efficiency power cycle based on isothermal compression
A novel high-efficiency internal combustion engine for power generation and direct-drive applications is being developed. Distillate-fuelled power plants in units of 7 MW electrical output are predicted to reach a net electrical efficiency of 60%. An efficiency of 58% is targeted for the gas-fired version. This compares with a net electrical efficiency of about 45% for advanced reciprocating ...
-
Commercial Demonstration of a PEM Fuel Cell for Power Generation
The chlor-alkali industry, one of the largest chemical industries in India and growing at an annual rate of 3.3%, is expected to grow along with the growing Indian economy. This MW size proton-exchange membrane (PEM) fuel cell product captures hydrogen produced in the chlor-alkali industry to create on site electricity and provide plant operators up to 20% of electricity savings. The electricity ...
-
A two-stage power electronic interface for fuel cell-based power supply system
The increasing energy demands, insufficient availability of power generation and increasing global environmental problems, need alternate/green power sources. Among the different green power technologies such as wind power, photovoltaic, gas turbine and fuel cell, the fuel cell-based distributed generation is considered as one of the most promising solutions for stand-alone/grid applications due ...
-
Kalisaya renewable hydrogen project - Case study
Which shall be the first commercial project of renewable hydrogen production in Chile, comes up as a solution for the conditions of pollution of the country, where waste from human activity and industrial or biological processes have raised the levels of pollution to become harmful for people and environment. Besides, it arises due to the development of hydrogen technology and fuel cells in ...
By INDHO
-
Biomass-fired fuel cells
The results are presented of a techno-economic analysis of systems integrating biomass gasification plant with phosphoric acid and molten carbonate fuel cells. The cases studied relate to the generation of electricity at a scale of 500 kWe. At this level, the plant would be suitable for small-scale commercial or industrial application and would allow for the export of surplus electricity. The ...
-
Hardware-in-the-Loop testing platform for distributed generation systems
The rapid validation of the expected performance of distributed generation installations is a critical step in the design process. However, the plethora of distributed generator types and the uniqueness of the load characteristics make the testing quite challenging. This paper introduces an original approach to Hardware-in-the-Loop simulation aimed to evaluate the performance and suitability of ...
-
The Big Deal With FUEL CELLS
Hydrogen is increasingly seen as a fuel of the future. Globally, more than 65,000 fuel cells, totaling over 300 MW, were shipped worldwide in 2016. Introduction The third industrial revolution, according to American economic and social theorist Jeremy Rifkin, will create a prosperous economy powered by clean energy and the Internet of Things. Hydrogen will be leveraged as one of the critical ...
By GenCell Ltd
-
Vitale renewable hydrogen project - Case study
The first commercial project of renewable hydrogen production in Spain, was born as a solution for the conditions of pollution in the country, where waste from human activity and industrial or biological processes have raised the levels of pollution to become harmful for people and environment. Besides, it arose due to the development of hydrogen technology and fuel cells in general, and its ...
By INDHO
-
Solar powered solid oxide fuel cell with thermoelectric generator
Durable, location independent, environmental–friendly sources of energy which allow for modular, few moving parts, low operating noise, high electricity generation efficiency and compact technology are highly desirable. Solid oxide fuel cells (SOFCs) are promising for such energy system development, since they are energy efficient and, if pure hydrogen is used, have virtually no emissions of ...
-
Development of a lignite-fired power plant concept with integrated pressurised fluidised-bed drying and fuel cells
In the coming decades, lignite will become one of the most important fuels for power production in Germany. In the last five years, Vattenfall Europe and RWE have put power plants of the 800–1000 MW class with efficiency of up to more than 43% into service. Four to five per cent efficiency can further be gained by using pre-dried lignite as fuel (BOA plus concept of RWE). Additional steps are ...
-
Wastewater as anolyte for bioelectricity generation in graphite granule anode single chambered microbial fuel cell: effect of current collector
Single chambered microbial fuel cell (sMFC) could be used for wastewater treatment as well as to generate electricity. Bioelectrochemical treatment of synthetic acetate based wastewater with simultaneous power generation was studied in tubular type air cathode sMFC. In order to improve the efficacy of MFC, three different anodic systems were considered such as graphite granules with graphite rod ...
-
The effects of electrode spacing on the performance of microbial fuel cells under different substrate concentrations
In this study, the electricity generation and organic removal in microbial fuel cells (MFCs) were examined for electrode spacing (ES) covering 5.8, 10.2, 15.1, and 19.5 cm, and for each ES the MFCs were discharged with a series of influent substrates (CODin). Results indicate that organic removal was related to CODin but not to ES. Best chemical oxygen demand (COD) removals of ...
-
Fuel cells - the environmentally friendly energy converter and power generator
Heat engines based on fossil fuel combustion produce harmful pollutant emissions. Environmental concerns and sustainable development call for new technology for energy conversion and power generation, which is more efficient, environmentally friendly and compatible with alternative fuels and renewable energy sources and carriers. Fuel cells meet all these requirements and are being rapidly ...
-
Performance of denitrifying microbial fuel cell subjected to variation in pH, COD concentration and external resistance
The effects of pH, chemical oxygen demand (COD) concentration and external resistance on denitrifying microbial fuel cell were evaluated in terms of electricity generation characteristics and pollutant removal performance. The results showed that anodic influent with weakly alkaline or neutral pH and cathodic influent with weakly acidic pH favored pollutant removal and electricity generation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you