fuel sampling Articles
-
Examination of hot particles originating from damaged fuels at the nuclear power plant Paks
Radioactive samples can contain radionuclides not only in homogeneous form, but also as 'hot' particles. With the characterisation of these high activity particles, information about the source of the samples can be obtained. The examination of hot particles is important in the case of environmental as well as nuclear samples; this paper details the analyses of particles originating from ...
-
EU fuel quality monitoring — 2014
Each year, under the requirements of the European Union (EU) Fuel Quality Directive (FQD) (1), EU Member States must report various types of information relating to the quality of petrol and diesel fuels sold in their territories. More specifically, Member States must sample fuels each year and analyse their technical characteristics to ensure that they are consistent with the requirements of the ...
-
Ethanol Detection Enzyme - Case Study
BACKGROUND This project was prompted by feedback from the Michigan Department of Agriculture & Rural Development (MDARD). Ethanol has been added as an octane enhancer in some Michigan gasoline for some time, it increases the octane almost 3 Anti Knock Index points. If gasoline contains ethanol, there is a limit of 10% of total volume for conventional fuels. [1] Around 13 billion gallons of ...
-
Biofuels blend measurements with portable mid-infrared analyzers
Globally, governments are putting more emphasis on sustainable energy sources and are creating energy policies that promote the production and use of biofuels. With the Renewable Fuels Standard-2 (RFS-2), the United States set biofuels blending volumes to 12.95 billion gallons (49.0 billion liters) for 2010, increasing to 36 billion gallons (136 billion liters) by 2022. With similar mandates or ...
-
Advanced Diesel Engine Testing Center - JCB Power Systems - Derby, UK - Case Study
Project Overview: Sierra CP designed and constructed ten new test cells to meet the requirements for the development of high specification test cell project for low emissions diesel engines up to 300kW with fast transient measurement capability and the latest cycle emissions measurement systems. To meet ongoing key engine development and testing milestones during the 24-month construction ...
-
Advanced Diesel Engine Testing Center Developed at Minimum Costs - JCB Power Systems | Derby, UK - Case Study
Project Overview: Sierra CP designed and constructed ten new testing cells to meet the requirements for the development of high specification test cell project for low emissions diesel engines up to 300kW with fast transient measurement capability, engine block testing, and the latest equipment for cycle emissions measurement systems. To meet ongoing key large and small diesel engine development ...
-
Get comparable ASTM/EN data for biodiesel blend while saving time and money
If you need to verity how much biodiesel is in a diesel fuel, sending a sample off to a laboratory can take several days to get an answer. This can add unnecessary delays if a truck has just been loaded for a delivery, but must wait for the lab result. The best solution is to have an on-site test where the fuel is loaded or delivered. The two most widely used analytical methods for measuring the ...
-
Semi Continuous Pyrolysis Plant Cost - Make Sure to Take a Look at Models From Overseas Suppliers
Do you are aware a batch rubber pyrolysis plant won't have the ability to meet your daily processing capacity requirements? Would you like to invest in a fully continuous tire to oil plant but do not have the funds? If you have, fortunately that you can now find semi-continuous pyrolysis plants in the industry who have higher daily output capacities than batch plants while remaining affordable ...
-
Taking matters into hand - Case Study
Biofuels must be up to scratch as contaminated or improperly blended fuel can damage a company’s bottom line. To ensure product quality several options exist including laboratory analysis, field test kits and portable lab instruments. Laboratory testing would be the ideal solution if everyone had the budget and the time to wait for the results. But in a market where time is money, quick ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you