gas turbine blade Articles

  • In situ weld repair of blade tenon of steam turbine in a power plant

    During one of the routine inspections in a nuclear power plant, it was found that a tenon of one of the third-stage blades of the Low-Pressure (LP) turbine had been worn/broken off the turbine blade, leaving only the remaining tenon riveted to the shroud piece. With only one of the two tenons remaining, the blade was at risk of getting freed from the shroud piece. Hence, it was necessary to ...


    By Inderscience Publishers

  • Animation: How Wind Turbines Work

    The windmill, which converts wind into rotational energy to mill grain or pump water, has been around since antiquity. It’s even been claimed that Ancient Babylonians planned to harness wind as early as almost 4,000 years ago, as part of a scheme for one of Hammurabi’s ambitious irrigation projects. By the end of the 19th century, wind energy took on a whole new meaning as engineers ...


    By GLOBE SERIES

  • Case study: Ahlstrom’s gas turbine air intake filter media helps to save energy, CO₂ and cost

    Finding new methods for saving energy is a global megatrend. Implementing technology that saves energy will have a positive impact on sustainability. Gas turbines are widely used for energy production as natural gas is one of the cleanest burning fuels and nowadays even more interesting source of energy. One of the most important parts in a gas turbine is the blade section, which converts the ...


    By Ahlstrom-Munksjö

  • The economic benefits of HEPA-grade filtration for gas turbine operation in the power generation industry

    Everywhere we look these days, one message stands above all the rest: energy must be used with greater efficiency Global energy demand is estimated to rise between 25 and 30 percent between now and 2040, fueled by growth in economic output and by a growing population in which billions of people —despite working hard to advance their standards of living — subsequently and inevitably ...


    By AAF International Ltd.

  • Full steam ahead: a look at steam Turbines and how the Speed of development is accelerating

    A whole ecosystem is built around steam turbine technology, consisting of manufacturers, service providers and owner operators. The technology has grown from simple marine applications to many different types of power generation, processing and other applications. Major players have pursued several approaches to growth and new product development: mergers & acquisitions; licensing and core ...


    By SoftInWay Inc.

  • Development of Pre-Turbo Catalyst for Natural Gas Engines

    Distributed power generation is an efficient method for reducing CO2 emissions through the elimination of transmission losses. Co-generation has similar benefits with higher thermal efficiency. Natural gas engines are very popular for these applications. Unfortunately, these engines emit significant levels of methane, ...


    By DCL International Inc.

  • What’s the Future of R&D in the Wind Industry?

    When the wind industry finally reacted to the world’s financial crisis—it didn’t fully hit us until 2010—at once, we lost both an incredibly vibrant global wind market and sufficiently robust profit margins. The market recovery is rebounding nicely now, thanks largely to government incentives, but profit margins will probably never fully recover—at least, not to the ...


    By NRG Systems

  • Innovation risk slows offshore wind foundation development

    As offshore wind technology develops ever more gigantic machines further from shore into deeper waters, it is common wisdom that new foundation technologies are needed. But are they? Monopile, and some jacket foundations, still dominate the offshore wind market in commercial operation. Prototype floating foundations are performing well in demo or pilot projects, but scaling up is only ...

  • Create new jobs & cut emissions by investing in renewable energy efficiency

    At a time when major US companies are announcing job layoffs almost daily, the renewable energy industry is hiring new workers every day to build wind farms, install rooftop solar arrays, and build solar thermal and geothermal power plants. The output of industrial firms that manufacture the equipment for these energy facilities is expanding by well over 30 percent a year. These investments both ...


    By Earth Policy Institute

  • Oceans of Energy

    Technologies that harness the energy of moving water or temperature differentials in the oceans promise to deliver abundant carbon-free electricity. Long before humans got hooked on fossil fuels, we learned how to harness the power of water to do work. Rivers ran mills that ground flour, sawed logs or spun looms that transformed fibers into textiles. Later generations realized that moving water ...


    By Ensia

  • Overhaul Completed in Just 30 Days

    Sulzer completed an overhaul of three General Electric steam turbines and five Clark compressors for a large ethylene plant in Colombia. Sulzer’s service centers in Texas and Bogotá worked together to inspect and repair the three turbines. Sulzer staff helped the customer with project planning, full commissioning, and testing within a very tight timeframe. The city of ...


    By Sulzer Management Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you