hazardous waste incineration plant Articles
-
Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden
Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated continuous mode since 2007. On-line measurements shows emissions ...
-
Case study - LKAB, Sweden
Customer: LKAB, Sweden Project: WetESP pressurized - Processgases Blast Furnace Year 1997 LKAB installed a pilot Blast Furnace at Swerea- MEFOS, Luleå. The product gas contains both CO and H2. The Blast Furnace operates at 0,8 bar over pressure. The design pressure for the WESP is 1,5 bar. The emission standards for dust are < 10 mg/Nm3. This gave WESP as the optimal choice. Result; ...
-
Case study - SP, Technical Research Institute of Sweden
Customer: SP, Technical Research Institute of Sweden Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ignite phase, full fire and extinguishing. The ignite phase is sooting, full fire will give high temperatures (500-700 °C) and the extinguish phase ...
-
Heat recovery and energy efficiency, improves profitability and reduces CO footprint
Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...
By Oilon Oy
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you