heat pump evaporator Articles

  • The solutions of industrial hot water boiler water evaporation

    When the water evaporation of industrial hot water boiler occurs,we should actively looks for the reasons and the corresponding solutions to extend its thermal efficiency. In the last article,the reasons of industrial hot water boiler water vaporization have been analyzed,after consulting the engineers of Zhengzhou Boiler Co., Ltd,this text will introduce the ...

  • Exergetic and sustainability performance assessment of geothermal (ground source) ejector heat pumps

    Although ejectors have been used in cooling/refrigeration and Heat Pumps (HP) applications for a long time, utilisation of Geothermal Ejector Heat Pump (GEHP) with Ground–Heat Exchanger (GHE) is a new idea, which has recently appeared in the literature. In this study, we model a GEHP system with a GHE in terms of exergetic aspects and apply our model to this system in the heating mode. The system ...


    By Inderscience Publishers

  • Zoo-technical application of Ground Source Heat Pumps: a pilot case study

    Ground Source Heat Pumps are energy-efficient HVAC systems usually adopted in residential and commercial buildings. However the control of the thermal environment is required not only in spaces occupied by people, but also in intensive breeding farms, in order to maintain healthy conditions and to increase productivity. In the Italian livestock breedings, heating is usually provided by means of ...


    By Tethys srl

  • Solar heat assisted solid desiccant dehumidifier saved over 30% electricity for air conditioning in Kish Island

    Thermal energy exploited from solar heater panels has been recently assisted in a desiccant wheel air conditioning demonstration project in Kish Island, Persian Gulf, Iran. “This demonstration unit was completed in late 2008 and successfully tested afterwards” said Pejman Izadkhast, M.E., the project manager, “simple solar water heating panels by total surface of 48m2 were utilized to supply ...

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - ElectraTherm green machine installed at biogas plant in Austria

    Biogas/Heat-to-Power Application on a GE Jenbacher 312 Location: Inning, Austria Gross Power Output Range: 18 - 32kWe Thermal Heat Input Range: 260 - 450kWt  Hot Water Input Range:  180°F (82°C) – 200°F (93°C) Hot Water Flow Range: 50 -130 GPM (3.15 – 8.21 l/s) Date Commissioned: Q1 2012 ElectraTherm installed its first Green ...


    By ElectraTherm

  • What Are Solar Buildings Technologies?

    Solar buildings technologies use the non-polluting power of the sun to help heat, cool, and power our buildings. Because buildings now use one-third of the energy currently consumed in this country, the potential markets for using solar buildings technologies in place of conventional ones is substantial. Whether you're a home owner, architect, builder, business owner, or industry or utility ...

  • Wind Generators as Role Models

    Advanced speed control methods are available for the regulation of wind generators. Working together with SET Sustainable Energy Technologies GmbH, Sulzer made use of one of these new concepts on pumps for the first time and implemented it with great success on a feedwater pump in a refinery. Unregulated pumps consume unnecessary drive energy when demand fluctuates. By controlling ...


    By Sulzer Management Ltd

  • Organic Rankine Cycle (ORC)

    Biogas/Heat-to-Power Application using a Dreyer & Bosse CHP power unit Location: Trechwitz, Germany Site Gross Power Output Range 500Kwe + 30-35kWe from Electratherm ORC Thermal Heat Input Range: ?375-450kWt   Hot Water Input Range:? 90-95°C ...

  • Turbine condensers for propylene production

    Propylene is one of the most important compounds in the chemical industry. It's primarily used to make the plastic polypropylene, but also in many other processes. A propylene factory in Ningbo, China set Körting Hannover AG an exceptional process-engineering challenge. It appointed the company to design special turbine condensers to produce 600,000 tonnes of propylene per year. The ...


    By Körting Hannover AG

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Energy efficiency: la Compagnie des Fromages counts on innovation with Emerson technologies

    The subsidiary of the Bongrain Group is pursuing a policy to reduce its energy usage and CO2 emissions by investing in a facility designed by Cofely Axima, a leader in industrial refrigeration and a subsidiary of GDF Suez. This solution stands out for its use of a process that heats and cools within a single cycle and its use of key components supplied by the Emerson Group – a Vilter ...

  • Ethanol by-product raises biogas output

    In 2007, the City of Fergus Falls, Minnesota undertook a study to evaluate adding thick corn stillage to the anaerobic digesters at its wastewater treatment plant (WWTP). The goal was to determine the potential for codigesting syrup with biosolids to increase biogas production, while avoiding operational and regulatory problems. The Fergus Falls WWTP operates three digesters in series, two ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you