lower flow waste heat Articles

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Hurricane MK System to reduce particulate matter from a wood bark and forestry waste boiler under 30 mg/nm3 - Case Study

    Foreword Hurricane MK System to Reduce Particulate Matter from a Wood Bark and Forestry Waste Boiler Under 30 Mg/Nm3 Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System, type MK, for Sciérie de Miremont, a French company located in the Nord of Périgord Vert, working in the forest exploitation sector and forestry waste. ACS was contacted ...

  • Case study - ElectraTherm partners with GB Consulting and EnviTec Biogas on first of its kind biogas application

    Biogas/ORC Application on GE Jenbacher 412 Engine Site: Straznice, Czech Rep. Engine Power: 844kWe Green Machine Gross Power Output Avg: 30-40 kWe Thermal Input to the Green Machine: ~500kW Hot Water Input Range: 94°C Hot Water Flow: 12 l/s Liquid Loop Radiator Water Temperature: -7 to 40°C In the Czech Republic, ElectraTherm, distributor GB Consulting and ...


    By ElectraTherm

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Turbine condensers for propylene production

    Propylene is one of the most important compounds in the chemical industry. It's primarily used to make the plastic polypropylene, but also in many other processes. A propylene factory in Ningbo, China set Körting Hannover AG an exceptional process-engineering challenge. It appointed the company to design special turbine condensers to produce 600,000 tonnes of propylene per year. The ...


    By Körting Hannover AG

  • Redhill Primary School - case study

    Reducing energy costs and shrinking carbon footprint without compromising on comfort When it came to choosing the right heating and cooling solution for Redhill Primary School, Worcestershire County Council wanted a sustainable alternative to the less environmentally friendly methods of oil or gas. ENER-G Sustainable Technologies (EST) delivered a full turnkey solution from thermal conductivity ...


    By ENER-G

  • Efficient steam production in paper mills

    The paper and pulp industry is an energy and emission intensive industry. Steam is an essential part of the paper making process with steam boilers, steam distribution systems and other processes accounting for a large percentage of a paper mill’s energy costs. Useful energy is often lost from boilers and process equipment such as heat exchangers, dryers, evaporators etc, as well as from ...

  • National brewery benefits from biogas

    Anheuser-Busch has installed anaerobic digestion systems at 10 of its 12 large breweries in the U.S., with an 11th system in design. Primary drivers are cost-avoidance for wastewater treatment fees and fossil fuel purchases. ANHEUSER-BUSCH, owner of 12 large breweries in the U.S., has committed to reduce its greenhouse gas emissions 5 percent from 2005 levels by 2010. The company is well ...


    By BioCycle Magazine

  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • How is biodiesel produced?

    This article is the first in a series that will take a close look at alternative fuels production and source materials. Over the next several months, we will cover natural gas, propane, ethanol, hydrogen, and fuel cells. This month, we will focus on biodiesel. Methods for creating fuels from renewable biomass feedstocks have been used since the 1800s. Vegetable oils were used in diesel engines ...

  • Cutting Carbon through Industrial Energy Efficiency: The Case of Midwest Pulp and Paper Mills

    While manufacturing is a critical part of the U.S. economy, it’s struggled over the last several years—both financially and environmentally. Overall U.S. manufacturing employment has dropped by more than one-third since 2000. Meanwhile, U.S. industry—of which manufacturing is the largest component—still ...

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

  • Variable frequency drive energy saving on air compressors

    When we are looking for an innovative way to make its rotary-screw compressors more energy efficient and operator-friendly, they turned to Gozuk, Low-Voltage VFDs. In addition to supplying VFDs to control the speed and torque of the AF-series compressors, the Gozuk project team designed software to control the system pressure, air delivery, oil temperature and duty cycle directly from the VFD. ...


    By Variable Frequency Drives

  • Energy Efficiency, Pollution Prevention, and the Bottom Line

    Introduction For many years, efforts to promote energy efficiency and pollution prevention (P2) traveled on parallel paths. Most energy efficiency advocates considered only the energy savings aspects of their projects and most proponents of P2 did not include energy on their list of sources of pollution. More recently, the two groups promoting energy efficiency and P2 have begun to realize the ...

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you