oxygen-fuel burner Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Forces attracted to fuel savings

    Magnatech Fuel Conditioning Limited have recently completed a contract to install their very powerful magnetic fuel conditioning units to all structural gas and oil burning equipment across five MOD bases in England. This was after research concluded that Magnatech was the most cost effective provider of this type of application.The MOD have used this technology previously, when a number of bases ...

  • Fuel inefficiency frozen out at Findus

    The installation of the proven Maxsys Fuel System at the Benton Lane, Newcastle plant of Findus has reduced the natural gas consumed by its three boilers by 6.6%. This substantial saving will allow the company to recoup the outlay on its investment within an impressively brief 12 month period. Findus is a household name in frozen food. Few can claim never to have ...


    By Maxsys Fuel Systems Ltd

  • Tuning Your Boiler for Fuel Savings – Out with the Old in with the New Technology

    The USA has about 811,000 MW of installed generation and over 52% of our Electric power is produced by aging coal fired power plants. The average utility boiler furnace was designed about 30-40 years ago. According to DOE records, the average boiler in 1974 was fired with 80% bituminous coal. Now, western PRB coal is much more prevalent and represents about 50% of total coal ...

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • Vortex structure and heat transfer in a diffusion combustion field with circulating flow

    A numerical study was performed to examine the vortical structures for combusting flow from a two-dimensional bluff-body slot burner in the transitional recirculating flow. The numerical results support the flow visualisation results for C3H8 combustion by Chin and Tankin [Chin, L.P. and Tankin, R.S. (1991) 'Vortical structures in a 2-d vertical bluff-body burner', Combustion Science and ...


    By Inderscience Publishers

  • Development of an energy efficient curtain flame ignition system for sintering of iron ore fines

    Research and Development Centre for Iron and Steel (RDCIS) of Steel Authority of India Limited (SAIL) has developed a 'curtain flame' ignition system for sinter mix ignition. Conventionally, either horizontal fired burners or top fired or a combination of both are used for ignition of sinter mix. These burners big in size but few in number are mounted on a rectangular box type furnace. This is ...


    By Inderscience Publishers

  • Focus Bioenergy No 7 2004: Biofuels - heating for the future

    Biofuels for heating of homes and properties is rapidly making headway. Environmentally friendly, comfortable and price-worthy small-scale heating with biofuels is done using pellets or briquettes. Changing an oil burner for a pellets burner or replacing electric heating with a pellet-burning stove is often very profitable. It demands less effort than wood firing but somewhat more work than using ...


    By Elmia AB

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Gas Fired Oven

      INDUSTRIAL GAS FIRED OVEN   CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation.  The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from ...


    By Epcon Industrial Systems, LP

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Intermediate Reynolds/Peclet number, flat plate boundary layer flows over catalytic surfaces for micro-combustion applications

    The reactive, flat plate boundary layer flow of close-tostoichiometric, methaneair mixtures over small size Pt plates is studied experimentally for intermediate Reynolds and Peclet numbers which pertain to micro-combustion applications. The surface temperature was measured with infrared thermography and correlated to reactant concentration profiles acquired with line-Raman imaging. Three phases ...


    By Inderscience Publishers

  • Pollution reduction from flares by swirl vanes in a cross-flow

    The effect of swirl on the performance of a flare stack was experimentally investigated as a passive control technique for combustion in a cross-flow. The burner comprised a circular fuel nozzle with a co-annular airflow, swirled by a concentric vane swirler, with a crosswind of air at the flare tip. It was found that the flames issuing from swirl-vane flare tip were shorter and had wider flame ...


    By Inderscience Publishers

  • APPLICATION OF H-VARB TECHNOLOGY TO IMPROVE COAL FLOW BALANCE AT NANTICOKE GENERATING STATION

    ABSTRACT The power generation industry is constantly challenged with the need to improve the emissions and heat rate performance of their assets. In the case of pulverized coal fired units, poor fuel balance at the burners is a relatively common issue that impedes efforts for combustion optimisation. The problem of fuel imbalance is particularly acute on units that employ splitting devices ...


  • Client - Oil Refinery, Eastern Europe

    Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe ...


    By Econotherm UK Ltd

  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you