power generation waste heat recovery Articles

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • Combined heat & power is a clean, efficient and economic energy solution

    The 21st century has highlighted a need for clean, efficient and economic energy, which has put Combined Heat & Power (CHP) into the limelight. By providing on-site power generation, waste heat recovery and system integration, CHP offers a realistic, near-term solution for exceptional energy efficiency and emission reduction. CHP systems can generate electricity locally while they recover ...


    By Shenton Group

  • Solar powered solid oxide fuel cell with thermoelectric generator

    Durable, location independent, environmental–friendly sources of energy which allow for modular, few moving parts, low operating noise, high electricity generation efficiency and compact technology are highly desirable. Solid oxide fuel cells (SOFCs) are promising for such energy system development, since they are energy efficient and, if pure hydrogen is used, have virtually no emissions of ...


    By Inderscience Publishers

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • GTI’s Cover Crucial Part of Slave Lake Pulp’s Biomethanation and Power Generation Project

    The Customer: Slave Lake Pulp, a subsidiary of West Fraser Mills Ltd., is a 240,000-tonne-per-year Bleached-Chemi-Thermo-Mechanical Pulp (BCTMP) mill located in northern Alberta, Canada. The mill primarily processes aspen to produce market pulp for the global market. The Customer’s Needs: Slave Lake Pulp was treating its high-strength wastewater in a ...


    By Geomembrane Technologies

  • Captive power plant efficiency for Africa

    Power distribution networks across Africa are notoriously unreliable. Frequent power interruptions can be enormously costly for many of the continent’s factories. Not only do power outages disrupt production batches, they can also damage or reduce the life of important plant components such as kilns. This too has a knock-on effect on wider the country’s gross domestic product – ...


    By Clarke Energy

  • What`s New? Biogas Power

    Technologies that connect the biogas line to the power line include cooling and clean up components, microturbines and reciprocating gas engines and control systems. TOP BILLING on the biogas to electricity stage typically goes to the microturbines and reciprocating gas engines. But in the theater of renewable energy from organics recycling, the show can’t go on without the supporting cast of gas ...


    By BioCycle Magazine

  • Generating biomass fuel from disaster debris

    Natural disasters create massive amounts of vegetative debris, the majority of which is landfilled or open burned. These environmentally harmful practices are the norm partly out of necessity and convenience, with a focus on clearing material as quickly as possible after a disaster - versus finding outlets for the material including mulch, compost and biomass fuel. The biomass fuel market in ...


    By BioCycle Magazine

  • Case study - ElectraTherm commissions 10 green machines on district heating system in Europe

    ElectraTherm commissioned 10 Green Machine 4400s in Levice, Slovakia in June 2014. ElectraTherm’s Czech distributor, GB Consulting, facilitated the deployment of Organic Rankine Cycle (ORC) systems on a centralized district heating system in Slovakia as a means of increasing on-site efficiency and generating clean energy. ElectraTherm’s Green Machine generates fuel-free, ...


    By ElectraTherm

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Exergy analysis of a syngas fuelled cogeneration cycle for combined production of power and refrigeration

    This communication presents a biomass fuelled cogeneration cycle for the combined production of power and refrigeration. The system is an integration of combined gas–steam cycle and absorption refrigeration cycle. A thermodynamic analysis through energy and exergy is employed, to investigate the effects of cycle pressure ratio, gas turbine inlet temperature and evaporator temperature on first–law ...


    By Inderscience Publishers

  • Bioenergy and charcoal production: an alternative option for disposal of combustible municipal wastes

    This project explored the possibility of using a CSIRO process to convert green waste (70,000 T/yr) to bioenergy. Tests conducted using CSIRO fluidised bed technique show that these wastes can be successfully converted to charcoal, and that this charcoal is very suitable for use as cooking fuels. The charcoal recovery rates achieved are also acceptable for commercial production and use as ...


    By Inderscience Publishers

  • Performance enhancement of GT–ST power plant with inlet air cooling using lithium bromide/water vapour absorption refrigeration system

    Performance improvement techniques in power generation systems especially in gas turbine–steam turbine (GT–ST) combined cycle (CC) power plants by compressor inlet air cooling prove to be much improvising. In this work, the performance enhancement of CC power plant by inlet air cooling method using lithium bromide–water (LiBr/H2O) absorption refrigeration ...


    By Inderscience Publishers

  • Performance enhancement of GT-ST power plant with inlet air cooling using lithium bromide/water vapour absorption refrigeration system

    Performance improvement techniques in power generation systems especially in gas turbine-steam turbine (GT-ST) combined cycle (CC) power plants by compressor inlet air cooling prove to be much improvising. In this work, the performance enhancement of CC power plant by inlet air cooling method using lithium bromide-water (LiBr/H2O) absorption refrigeration system powered by waste heat from heat ...


    By Inderscience Publishers

  • The effect of precooling inlet air on CHP efficiency in natural gas pressure reduction stations

    Almost all pressure reduction stations in Iran use expansion valves to reduce the natural gas pressure, which leads to wasting large amount of exergy. In this paper, a system is proposed which includes the modification of a conventional pressure reduction station with the addition of a turbo expander and a gas turbine for power recovery and generation. The next step is investigating the effect of ...


    By Inderscience Publishers

  • Saint-Vincent Hospital, Ottawa, Ontario, Canada

    Boiler/Cogen Heat/Energy Recovery Application Thermal Energy installed designed and implemented an integrated FLU-ACE heat recovery system with cogeneration unit for efficient electrical power generation and an overall reduction in energy consumption. The installation consists of a natural gas fueled engine with a 425 kW generator, waste heat boiler, and FLU-ACE system processing combined flue ...

  • Conch case study

    A major advancement for industrial energy efficiency in China made possible through technology transfer Camco is working with Anhui Conch Cement Company Limited, the largest cement producer in China, on a programme of energy efficiency projects at multiple Conch production facilities. The projects all use Japanese advanced high efficiency waste heat recovery technology, never before commercially ...


    By Camco Clean Energy Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you