slop-oil Articles

  • Used Oil vs. Waste Oil – What’s the difference?

    Nice overview of differences between waste oil and used oil. I had thought most of us had a clear understanding of the difference between these two types of oil waste streams but during a recent ISO audit I encountered a site who labeled all of their used oil as “waste oil”. While these terms sound interchangeable there can be differences in how they are managed. ...

  • WIRAJASA Waste Oil Burner

    Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...


    By CV Wirajasa Teknik Industri

  • On-site regeneration of transformer oil

    Regeneration of transformer oil at the transformer’s location is an important preventive measure of transformer servicing.   Transformer life time is, in essence, the life time of its insulation system. The most widely used insulation is liquid insulation (transformer oils) and solid insulation (paper, i.e. cellulose insulation). The oil provides for at ...


    By GlobeCore GmbH

  • Transformer oil quality control

    It is impossible to ensure reliability and longevity of energy systems without controlling the quality of transformer oil. Recent experience shows that approximately 30% of transformer oil, filled in power transformers, has deteriorated to the point when it becomes a risk factor. This is caused both to natural degradation of oil in operation due to thermal oxidation aging, and contamination with ...


    By GlobeCore GmbH

  • Oil re-refining methods

    Re-refining is a process of reclaiming used lubricant oils and restoring them to a condition similar to that of virgin stocks by filtration, clay adsorption or more elaborate methods. By this article we want to give you a briefly information about existing methods of oil re-refining. To get more information about installation for oil re-refining processes you ...


    By GlobeCore GmbH

  • Case study - tramp oil

    Customer: Midwestern Manufacturer of metal stampings and machined parts for the Automotive Industry. The Problem: Tramp Oil collecting in metal working coolant.  Raises oil concentration levels to unacceptably high levels, adversely effects product quality, promotes bacterial growth which can lead to worker skin disorders.  Cutting ...


    By SkimTech Inc.

  • Why regenerate transformer oil?

    Article contain the information about the most important definition in transformer oil treatment. Its include terms such as transformer oil regeneration, insulation oil regeneration, purification of oils, degassing of oil, oil treatment, filtration by Fuller's earth, desludging, etc.  Regenerating the oil or other insulating medium in a transformer is probably one of the few environmentally ...


    By GlobeCore GmbH

  • Flaxseed Oil Waste

    A commercial manufacturer of flaxseed oil was having a problem obtaining the FOG and TSS level required by their local POTW. A sample was submitted to our laboratories for treatment analysis. The wastewater was at a pH of 7.0 so no adjustment was required. The sample was treated with Floccin J and the results met their ...


    By Integrated Engineers Inc.

  • Upbeat oil and gas sector

    Managing risk and maximising opportunities were the central theme at this year’s IP Week, held in London last month. Over 2,000 delegates had the opportunity to hear of the challenges facing the oil and gas industry as it seeks to invest in new territories and new technologies in the drive to respond to demand growth, while considering health, safety, environmental and geopolitical ...


    By Energy Institute (EI)

  • Enisei oil production facility

    Capitalizing on previously flared gas Oil production is a well established industry in Russia. Enisei Ltd is an oil business situated in the town of Usinsk, Komi Republic, Russia. The company’s core business is oil production at the oil field located 60 km North of Usinsk. Full utilization of APG is not a widely spread practice in Russia. In general, complete utilization of ...


    By Camco Clean Energy Company

  • Pyrolysis Oil Specifications

    Pyrolysis oil is the end product of waste plastic and tyre pyrolysis. Pyrolysis oil is widely used as industrial fuel to substitute furnace oil or industrial diesel. Typical industrial applications of pyrolysis oil as a fuel: Boilers Furnaces ...

  • Why clean transformer oil?

    Related Website: http://www.oilrenew.com http://www.leizeyan.com http://www.zhongnengcq.cn ...


  • Peak Oil – Peak Opportunity?

    Possibility and public policies can harness renewable energy technologies for a bright future “Alternative” fuels are nothing new. In fact, they were the mainstream power source a century ago. Rudolph Diesel built his engine to run on peanut oil. Henry Ford designed the Model T to run on ethanol. Wind delivered a significant source of power in the last century. Cheap gasoline (and ...

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Oil refinery application case study

    This case study illustrates an application on an oil refinery. Main Reasons for use: Increase efficiency of production Reduce water consumption Reduce excess flaring of gases Background Fushun Oil Refinery No.2 is located in NE China. Fushun has 2 medium sized oil refineries both have installed Wap-Flaro for ...

  • Vacuum Transformer Oil Filtration Machine

    ZY transformer oil filtration machine can remove water, gas and impurities from oil with high efficiency to elevate the withstand capability and quality of oil, it is used for treatment of non-conformable transformer oil, mutual inductor oil and circuit breaker oil in power industry including manufacturing enterprises. ZY transformer oil filtration machine ensures a safe operation of power ...


  • Client - Oil Refinery, Eastern Europe

    Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe ...


    By Econotherm UK Ltd

  • Importance of synthetic blend oil change

    All synthetic oils are producing using chemical synthesis process, reaches high homogeneity of a product and maximum chemical and thermal stability of properties. Uses of expensive and difficult technologies and components, with use of expensive source of raw materials are set the higher cost of oil. Synthetic and mineral oils are different from each other by a structure of a molecular basis. In ...


    By GlobeCore GmbH

  • Transformer Oil Hydrotreating case study

    Hydrogenation of waste transformer oil (electrical insulating oils) can produce an oil product that is far better in quality and yield in comparison with fixed bed clay adsorption or reaction with sodium metal. This is proven at Sequoia- client’s facility in Midwestern USA. The 5 million gallon/year throughput naphthenic oil hydrotreater produces oil free of PCBs (polychlorobiphenyls ...


    By Sequoia Global, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you