solarization film Articles
-
Solar Film Transmission Meter
LS101 Solar Film Transmission Meter Window Tint Transmission Meter For Glass Film With 365nm UV 950nm IR Rejection 550nm Visible Light Transmittance LS101 LS101 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. ...
-
UV-IR Power Meter
XZBELEC Technology specialize in researching and designing optical instruments, including the IR power meter used to test the IR intensity and the UV power meter used to test the UV intensity, at the same time, these power meters can calculate the rejection rate. Especially apply in the test of automotive solar film, insulation film, insulation glass. UV-IR Power Meter FS2150 Sales kit Solar ...
-
UV-IR Power Meter
XZBELEC Technology specialize in researching and designing optical instruments, including the IR power meter used to test the IR intensity and the UV power meter used to test the UV intensity, at the same time, these power meters can calculate the rejection rate. Especially apply in the test of automotive solar film, insulation film, insulation glass. UV-IR Power Meter FS2150 Sales kit LS122 IR ...
-
Eco-Brella: prototype development of the umbrella as harvester of solar and wind energies
The familiar umbrella has been redesigned for power harvesting from renewable energy sources resulting in the Eco-Brella . Several engineering technologies are utilised: aerodynamics for fin design, mechatronics for power management, materials for thermoelectric and solar film, CAD for the layout, and heat transfer for human comfort. The result is a sustainable design capable of harvesting ...
-
Modelling of thin–film tandem solar cells
Numerical modelling of thin–film tandem solar cells is investigated using PC–1D program. The program is adapted to simulate the performance of multi–junction solar cells. Cadmium–zinc telluride (Cd0.6Zn0.4Te) is chosen as an absorber layer material for the wide band gap top cell and copper indium diselenide (CuInSe2) is chosen as an absorber layer material for the bottom cell in the whole tandem ...
-
Hanergy Solar UAV Project - Case Study
Project Name: Hanergy Solar UAV Project Location: Beijing Component technology: Alta Devices The UAV adopts Alta Devices' world leading gallium arsenide thin-film solar technology. The highest conversion rate of thin-film solar cells is as high as 31.6%. Public data shows that under the same area, it has performancetwo to three times compared to that of ordinary flexible solar cells, and ...
-
In situ indium–induced crystallisation of low temperature nano–poly silicon (LTNPS) thin film on ITO glass substrate
For the first time, the low temperature nano–poly silicon (LTNPS) thin films were formed on indium tin oxide (ITO) glass with a temperature of ∼200ºC using the in situ indium–induced crystallisation of the plasma enhanced CVD (PECVD) deposited a–Si. Compared with the conventional method for transfer of the PECVD formed amorphous structure to the nano–poly one, the technology features a low ...
-
Gobi Challenge for Road ofXuanzang - Case Study
In May 2015, the TenthGobi Challenge for “Road of Xuanzang” (“Ge Shi”) was competed in Mohe Yanqi Gobi afterhiking through 112 kilometers of no man's land for four days and three nights. Hanergy thin-film solar power package helped China-Europe Business School to provide everyone with portable, fast and easy ...
-
Solar Cell Thin Film Analysers from Hiden Analytical
Solar cell thin film analysers are used to facilitate research and development (R&D) into novel photovoltaic architectures by monitoring the processing conditions for epitaxial deposition of photovoltaic materials. These growth methods cover a range of advanced techniques, such as plasma-enhanced chemical vapour deposition (PECVD) and radio frequency sputtering, which are used to generate a ...
-
The comparison of several silicon solar cells
The solar cell is also known as the "solar chip", it is a kind of photoelectric semiconductor wafer that works by solar energy. Solar energy refers to solar radiation energy. Since the formation of the earth, organism mainly light and heat, provided by the sun to survive, and as a method of food preservation, such as salt and salted fish. But nowadays, the application of solar energy gathered ...
-
Solar Cell Thin Film Analysers: The Basics
Global energy consumption is rapidly outstripping the available supply. When we factor in that over half of the world’s electricity is generated by non-renewables and that the global population growth remains incredibly high, concerns about the energy sector’s ability to provide for future generations seem well-founded. A gradual pivot towards renewables seems both inevitable and ...
-
Top industry experts set to gather at Thin Film Summit in Berlin
PV Insider announce that ‘Busting the Myths’ will be the main focal point of the 4th Annual Thin Film Solar Summit Europe (5-6th March 2012, Berlin), helping to steer the thin film industry out of confusion and fear towards reality and promise. 2011 proved to be a turbulent year for the European thin film industry, with big names going bust, consolidation of the market, and ever ...
-
Flexible Thin-Film Solar Panels - Coca-Cola - Case Study
UNI-SOLAR’S flexible thin-film solar panels were used to create a new, lighter-weight, single-ply roofing membrane for CCE’s bottling facility. The new system combined 128-watt photovoltaic modules capable of producing 100 kilowatts of clean power from the sun daily, for every 28,000 square feet of roofing material installed. This capacity is critically important during peak hours ...
-
Walmart turning to thin-film solar for new installations
Walmart (Bentonville, AR) announced that it plans to expand its renewable energy development initiatives through the adoption of thin-film solar technology at a number of its solar power development sites. The company is in the process of adding solar generating systems at 20 to 30 facilities in California and Arizona, and many of these sites will feature thin-film technology, the company said. ...
-
Speakers at Thin Film Europe 2012 answer your crucial questions about the industry
During our recent webinar on the future of thin film, your peers sent in countless questions about how this burgeoning technology will fare in 2012. So, we went away and asked our industry contacts and upcoming conference speakers – read on to see iSuppli & Solar Buzz respond to your questions on the future of Thin Film for 2012 and beyond. When should we expect the next round of ...
-
Case study - Future Business Centre - Cambridge
System kWp: 4.6 Area: 57 m sq Inverter: Aurora Modules Used: PS-A opaque, PS-C transparent Double Glazed Unit (DGU) Polysolar was requested to provide the PV glazing for the stairwell curtain walling and the decorative rainscreen cladding. This saw the first truly transparent curtain wall elements employed in the UK and a BREEAM rating of Excellent. Objective: Generate renewable energy ...
-
Effect of trap depth and interfacial energy barrier on charge transport in inverted organic solar cells employing nanostructured ZnO as electron buffer layer
Inverted organic solar cells with device structure ITO/ZnO/poly (3–hexylthiophene) (P3HT):[6,6]–phenyl C61 butyric acid methyl ester (PCBM)/MoO3/Ag were fabricated employing low temperature solution processed ZnO as electron selective layer. Devices with varying film thickness of ZnO interlayer were investigated. The optimum film thickness was determined from photovoltaic parameters obtained from ...
-
Efficiency is so in right now
In the movie The Social Network, Facebook founder Mark Zuckerberg doesn’t want ads on an early version of his social network; he understands that first and foremost, his site has to be cool. And ads, he says, aren’t cool. Unlike Zuckerberg (well, at least in the beginning), the energy efficiency industry hasn’t quite grasped the value of being cool. It’s an industry that ...
-
Transparent conducting oxides superstrate for thin film solar cells: an industrial prospective
The demand for a TCO coated glass substrate as a base material and front electrode of the solar cells is expected to grow very strongly in the next few years. Therefore it is crucial to prepare the industrial tools and proper glass compositions to meet this very impressive demand. Mass production of extra clear glass and atmospheric pressure thermal CVD tool installed directly on the float glass ...
-
Water vapour permeation measurement for PV Solar Cell packaging
With fears of carbon dioxide causing global warming and diminishing supplies of fossil fuels, a looming energy crisis is affecting all countries. As a consequence, a great deal of world-wide effort is going into the development of alternative energy technologies. At present, wind, hydro and geothermal are becoming well established with more niche roles for tidal and solar. The latter technology ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you