steam boiler product Articles
-
Brigham Young University Rexburg, Idaho - 5.7 MW Gas Turbine CHP System - Case Study
Quick Facts LOCATION: Rexburg, Idaho MARKET SECTOR: University FACILITY SIZE: Educates 34,000 students FACILITY Total Electrical Energy Production: 38.4 million kWh/year EQUIPMENT: 5.7 MW Solar Taurus 60 gas turbine with 50,000 lbs/hour heat recovery steam generator (HRSG) FUEL: Natural gas-fired, with dual fuel oil-firing capability for both the gas turbine and HRSG USE OF THERMAL ENERGY: Steam ...
-
Oil Refinery, Russia - Case Study
Situation BEFORE Aerovit Installation. The diagram shows the steam production of one boiler. Right after the manual cleaning session the steam production is about 18t/h, then after 2-3 weeks decreasing to 11-12 t/h. The final result of the dust accumulation process is a critical reduction of the steam production, which after approximately two months of operation decreases drastically where the ...
By Aerovit A/S
-
Project - Replacing Hydrazine With Polyamines for Alumina Refinery Boilers
Introduction Alum SA, is the sole alumina refinery in Romania, with a production capacity of 600.000 tons per year, and is part of one of the largest vertically integrated aluminum manufacturers group in Europe, ALRO, which has been operating since 1965. ALRO GROUP mainly uses Alum SA’s output for aluminum production. Plant owner: Alum SA, Tulcea, Romania Plant type: Alumina Factory ...
By Fineamin SA
-
Film Forming Water Treatment at SAIDEF Incineration Power Plant - Case Study
"We have been using the FINEAMIN products for our water treatment since 2007 and during this time we have maintained the operating parameters. No corrosion was present, nor any other damage. Our turbine is regularly inspected every five years by a third party. We are extremely satisfied with the FINEAMIN products and with H2O Facilities services." Client name: Saidef SA, Fribourg Plant type: ...
By Fineamin SA
-
Aerovit Installation - Orlén Refinery, Lithuania - Case Study
Situation BEFORE Aerovit Installation Orlen Lietuva Refinery has two boilers which are losing a considerable amount of heat due to catalyst dust build-up in the tubes. After two month of operation the boilers tubes are fully covered by catalysts dust, but Orlen ´s technicians cannot stop them for manual cleaning because it would imply the whole refinery to shut down. The diagram shows ...
By Aerovit A/S
-
Benz Air Engineering Engineering Steam Efficiency - Case study
The following is a case study of a tomato processing plant located in Woodland, California. The facility produces canned tomato products. The steam boiler plant provides steam for process loads. The boiler plant contains five high-pressure steam boilers. Our case study is the retrofit for Boiler #6, Trane-Murray, water-tube boiler of 150,000 lb. per hour rated capacity (capacity is limited to ...
-
The microwaves steam the beech logs – they are ready for peeling in just 8 minutes. Fully autonomous, no human intervention - Case study
The unique microwave equipment has made steaming a simple, fast and continuous process. What we’ve been dealing with The customer, a major wood processor, like many others, had been using the batch steaming method. However, he was not satisfied with the complex logistics, the long processing time and the inefficient use of staff. He therefore thought about how the whole process could be ...
By ROMILL s r.o
-
Improve Boiler Efficiency
In many chemical plants, the electricity the plant uses is derived from a natural gas power plant or a co-generation plant burning waste gas streams. In large boilers (Figure 1), power plants bring together air and fuel (natural gas, waste gas, oil or coal) for combustion, which creates heat. The heat boils the water, creating steam. The steam runs through a turbine, which causes the turbine to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you