waste gas technology Articles

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Fugitive Gas Emissions In The Petroleum & Natural Gas Industry

    Challenge: Fugitive emissions in the petroleum and natural gas industry can come from a variety of sources and are classified as intentional (venting from tanks, compressor vents and stacks) or unintentional (equipment wear and tear, improper assembly, damage or manufacturing defects).  Most of these fugitive gas leaks are considered insignificant or  too small to ...


    By Leak Imaging, LLC

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Assist Gas Measurement in Flare Stacks

    The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

  • City of Iqaluit to Test MAGS Technology

    aluit will be the site for a new waste management pilot project in Nunavut, testing a micro auto gasification system or MAGS. The system will thermally decompose solid waste and oils, reducing the garbage to eight per cent of its original volume. The process creates thermal energy that will be used to heat nearby buildings, and gas that will be ...

  • SGBI opinion article: shale gas

    Government perceives electric vehicles to be a panacea that will solve problems surrounding air quality and CO2 emissions simultaneously. The EV has two main selling points: reduced CO2 emissions and high efficiency. However, these are only valid at a superficial level and the argument disintegrates under any level of scrutiny. In terms of CO2 emissions, EVs replace ‘average’ cars to ...


    By CNG Services Limited

  • Background: EU electricity and gas directives

    3.rd Energy Market Package, proposed September 2007 September 2007 the EU Commission proposed a revision of the electricity and gas market directives with amendmets of the directives on electricity and gas markets and the directives on cross-border trade of electricity and gas. The main changes are that all countries must have independant regulators of the electricity and gas markets, that these ...

  • Using Venturi Scrubber Technology for Syngas Cleaning

    As part of our nation's program to reduce dependence on fossil fuels, various gasification technologies are being applied. These processes take renewable organic material and, through the application of heat and pressure, convert the materials into syngas for further use. Arguably, in nearly all of these processes, the most critical design aspect is the reliable and efficient removal of ...


    By Bionomic Industries Inc.

  • Energy from biomass and waste – case studies in China

    With its vast territory and abundant biomass resources, China appears to have suitable conditions to develop biomass energy. It has long been recognised that it is important to develop advanced technologies for conversion of biomass into clean and convenient fuels in order to raise the efficiency of biomass energy utilisation and alleviate air pollution. Through past efforts some progress in ...


    By Inderscience Publishers

  • Biomethane enters the gas grid article for energy world

    The Carbon Plan, published in 2011, aims to reduce UK carbon emissions by a quarter from 1990 levels. With the current policies in place, the UK is on target to reduce emissions by over a third by 2020 and with the introduction of new technologies this should increase to an 80% reduction by 2050. However, currently around half the UK’s carbon emissions result from heat related processes and ...


    By CNG Services Limited

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Energy from waste: How the Gasplasma system works

    As well as being able to convert refuse into power and empty out existing landfill sites, releasing the land for reuse, the Gasplasma process offers a significant benefit: its by-product is a building material, not a waste. A process called Gasplasma combines two well proven technologies in a unique combination to convert waste into a very clean, hydrogen-rich synthesis gas ...


    By Advanced Plasma Power (APP)

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


  • Marketing Analysis of Low Temperature Waste Heat Boiler

    Environmental pollution brought by the burning of fossil fuels and improper energy use structure have became big problems of boiler manufacturer like ZG. To need the market demand for the development of new energy and renewab ...


  • Oil and gas incumbents: the upside of cleantech collaboration

    The global transition to a low-carbon economy is now inevitable. Yes, there will be winners and losers. To remain dominant, energy incumbents (like Enbridge and Royal Dutch Shell) must find scalable, low-carbon energy assets to develop. Cleantech collaborations—partnerships between traditional energy companies and emerging cleantech stars—offer new ‘cleanfield’ ...


    By GLOBE SERIES

  • The natural gas revolution: Good or bad for energy efficiency?

    If there were an equivalent in the energy industry to Time Magazine’s Person of the Year, natural gas would be this year’s winner. The dramatic rise in natural gas supply, and fall in price, has reconfigured the energy scene in the United States, suddenly creating a bounty of domestic energy, driving down wholesale power prices and speeding retirement of polluting coal-fired plants. ...

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Innovative energy from waste project gets £1.9m injection

    A pioneering project to turn waste into energy has today been fired up by £1.9million of funding from Ofgem’s Gas Network Innovation Competition. The Swindon-based demonstration project – managed by National Grid, Advanced Plasma Power and Progressive Energy - will use waste as a feedstock to produce low carbon methane, or bio-substitute natural gas ...


    By Advanced Plasma Power (APP)

  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you