waste heat recovery boiler Articles

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Combined heat & power is a clean, efficient and economic energy solution

    The 21st century has highlighted a need for clean, efficient and economic energy, which has put Combined Heat & Power (CHP) into the limelight. By providing on-site power generation, waste heat recovery and system integration, CHP offers a realistic, near-term solution for exceptional energy efficiency and emission reduction. CHP systems can generate electricity locally while they recover ...


    By Shenton Group

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Ottawa Hospital, Ottawa Heart Institute, Ottawa, Ontario, Canada

    Boiler Plant Application Objective The turnkey FLU-ACE waste heat recovery system was installed by Thermal Energy on four boiler exhausts from a power plant which produced a peak (winter) steam rate of 70,000 lbs/h. The system was designed to recover 10 mmBTU/h of otherwise wasted energy. The recovered heat is used to heat the the world-famous University of Ottawa Heart Institute ...

  • Saint-Vincent Hospital, Ottawa, Ontario, Canada

    Boiler/Cogen Heat/Energy Recovery Application Thermal Energy installed designed and implemented an integrated FLU-ACE heat recovery system with cogeneration unit for efficient electrical power generation and an overall reduction in energy consumption. The installation consists of a natural gas fueled engine with a 425 kW generator, waste heat boiler, and FLU-ACE system processing combined flue ...

  • Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo

    Thermal Energy International Inc. (TEI) will be exhibiting its range of awarding winning energy efficiency products at stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October.  TEI’s products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • National brewery benefits from biogas

    Anheuser-Busch has installed anaerobic digestion systems at 10 of its 12 large breweries in the U.S., with an 11th system in design. Primary drivers are cost-avoidance for wastewater treatment fees and fossil fuel purchases. ANHEUSER-BUSCH, owner of 12 large breweries in the U.S., has committed to reduce its greenhouse gas emissions 5 percent from 2005 levels by 2010. The company is well ...


    By BioCycle Magazine

  • Case study - Keeping ethanol production green

    OVERVIEW Originally published in Pollution Engineering Magazine. In an effort to reduce the world’s dependence on fossil fuels, there has been a major push towards alternatives. Ethanol has been at the forefront of this movement because it reduces greenhouse gas emissions from automobiles and its production has a positive net energy balance. The homegrown fuel also ...

  • What`s New? Biogas Power

    Technologies that connect the biogas line to the power line include cooling and clean up components, microturbines and reciprocating gas engines and control systems. TOP BILLING on the biogas to electricity stage typically goes to the microturbines and reciprocating gas engines. But in the theater of renewable energy from organics recycling, the show can’t go on without the supporting cast of gas ...


    By BioCycle Magazine

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you