waste heat solution Articles

  • Is waste heat the silver bullet?

    The energy industry tends to get stuck on certain words. Silver bullet is one of them. Insiders and policymakers often like to say there is no silver bullet to fix US energy woes. We need a portfolio of solutions – renewables, efficiency, smart grid, transmission expansion, coal sequestration, etc. That may be true, but Tom Casten begs to differ. Casten is a bit of a rock star in the field of ...

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Combined heat & power is a clean, efficient and economic energy solution

    The 21st century has highlighted a need for clean, efficient and economic energy, which has put Combined Heat & Power (CHP) into the limelight. By providing on-site power generation, waste heat recovery and system integration, CHP offers a realistic, near-term solution for exceptional energy efficiency and emission reduction. CHP systems can generate electricity locally while they recover ...


    By Shenton Group

  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • Resource treatment of HPF coking desulphurisation waste solution: composition and characteristics of pyrolysis

    HPF (H: hydroquinone; P: dinuclear cobalt-phthalocyanine sulfonate; F: ferrous sulphate) coking desulphurisation waste solution (CDWS) produced from coking oven gas desulphurisation process is an extremely harmful pollutant. The fundamental natures of this solution, which involves its main ingredient and content, type of organic matter, thermal decomposition characteristics of salt, and ...


    By Inderscience Publishers

  • A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery

    This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...


    By Inderscience Publishers

  • Much light, little heat efficiency

    Energy efficiency in the US is much light and little heat – literally.  Government policy pays a great deal of attention to saving electricity, but focuses little on the thermal energy we waste.  “Policy is electricity-centric in the US. Unless you are making kilowatts, the most efficient investments are off the radar,” said Rob Thornton, president of the ...

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Energy conservation in aluminium foundries by waste heat recovery from solidifying molten metal

    This paper presents a unique attempt to preheat the raw materials by recovering the waste heat from solidifying molten metal in shape castings of aluminium using sand moulds. Finite element analysis of the problem using ANSYS has also been done, results of which show satisfactory agreement with the experimental results. By using this preheating method, it is proved that around 16% of heat ...


    By Inderscience Publishers

  • Solution concepts for the production of biogas

    With its products that go to form part of biogas plants, it is not only a significant pioneering role that Hofstetter Umwelttechnik AG in Switzerland deserves. The company in Berne also adopts a leading position on the worldwide market for utilizing biogas. Hofstetter products – the socalled flares and compressor stations – are designed both for fermentation plants for biomass and for plants for ...


    By Hofstetter BV

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Domestic heating systems are more efficient with Scalewatcher

    In hard water areas plumbing, hot water systems and appliances quickly become encrusted with limescale resulting in increasing energy bills and the early renewal of boilers and appliances.  The award-winning, patented, Scalewatcher water-conditioner, from Scalewatcher North America, offers a simple and permanent solution to limescale thereby reducing energy bills and making heating systems ...

  • Heat recovery system at a flooring manufacturer - Case study

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

  • Case study - Decorpanel opts for Mawera biomass solution

    With six Homag beam saws, CNC drilling machines, CNC routing machines and edgebanders producing around 20 tonnes in off-cuts every week, Decorpanel of Hetton-le-Hole needed a boiler that would enable the company to utilise its waste fully and provide heating for the whole site. With the existing system out of action and a factory that was heated with gas and electric, Decorpanel’s Ian Ling ...


    By Mawera (UK) Ltd

  • Coupled Heat and Moisture Flow in Unsaturated Swelling Clay Barriers

    The main thermodynamic forces active in the near field of a nuclear fuel waste multiple barrier system during the unsaturated stage are the gradients of temperature, fluid pressure, and chemical potentials. The processes that have a direct impact on the transport mechanism of heat and moisture within the clay-based compacted buffer material are coupled. The major problems in describing coupled ...


    By ASTM International

  • Creating green energy requires accurate weighing solution

    A 50-tonne, Avery Weigh-Tronix weighbridge/truck scale is helping Malaby Biogas generate 500kW per hour of green electricity to feed the National Grid and supply renewable energy to nine business units on its UK-based anaerobic digestion facility. The 15m, 50 tonne Bridgemont pit mounted weighbridge/truck scale is being used on site ...


    By Avery Weigh-Tronix

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Allweiler Peristaltic Pumps: an ingenious solution for biogas plants

    Installations and plants used to process biomass for the production of biofuels must be capable of handling difficult conditions. For example, intermediate products in the production of biodiesel exhibit a high level of chemical aggressiveness. Accordingly, pumps, pipe connections, and fittings must be capable of resisting these demanding conditions. In addition, waste products usually contain a ...


    By ALLWEILER GmbH

  • TAIM WESER, at the forefront in biomass cogeneration solutions

    The state-of-the-art biomass gasification plant, developed by TAIM WESER utilizing proprietary technology, is now up and running successfully, joining the range of technological products offered by the company. This solution offers clients high energy efficiency, streamlined processes and a design that, owing to its compact dimensions, allows the equipment to be installed at the location where ...


    By Taim Weser S.A.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you