waste heat technologies Articles

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Marketing Analysis of Low Temperature Waste Heat Boiler

    Environmental pollution brought by the burning of fossil fuels and improper energy use structure have became big problems of boiler manufacturer like ZG. To need the market demand for the development of new energy and renewab ...


  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • Thermodynamic and exergy efficiencies of magnetocaloric energy conversion utilising industrial waste heat

    An investigation under which conditions industrial waste heat utilised with magnetic energy conversion machines can be a possible alternative to conventional energy conversion technologies is presented. The application of a numerical model leads to the thermodynamic efficiency, the exergy efficiency, and approximate values of the total mass and the total volume of a magnetic energy conversion ...


    By Inderscience Publishers

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Energy conservation in aluminium foundries by waste heat recovery from solidifying molten metal

    This paper presents a unique attempt to preheat the raw materials by recovering the waste heat from solidifying molten metal in shape castings of aluminium using sand moulds. Finite element analysis of the problem using ANSYS has also been done, results of which show satisfactory agreement with the experimental results. By using this preheating method, it is proved that around 16% of heat ...


    By Inderscience Publishers

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • Small-scale heat and power at B.C. mills

    Fred Scott introduced the B.C. Bioenergy Network (BCBN) as an alliance between Pristine and Nexterra Energy Corp. BCBN is a network of 15–20 individuals, with 10 MW power plants located across B.C. at mill operations in forest communities. Nexterra has developed a proprietary gasification technology that “takes wood waste material and [produces] clean burning synthetic gas or syngas,” Scott said. ...

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Energy waste the size of Japan

    Here is a startling fact: US power plants waste more energy than many countries use, including advanced economies like that of Japan. The wasted energy is in the form of heat thrown off when power plants produce electricity. This is one of the points being brought to light by the International District Energy Association (IDEA), as it promotes new federal incentives for heat efficiency. While the ...

  • WIRAJASA Waste Oil Burner

    Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...


    By CV Wirajasa Teknik Industri

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you