waste oil heat Articles

  • WIRAJASA Waste Oil Burner

    Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...


    By CV Wirajasa Teknik Industri

  • `Must Do` Waste Oil Furnance Maintenance

    Recommendations to keep your waste oil burner running at peak performance and resistant to mechanical issues, including a list of typical standard maintenance measures. Getting into a scheduled maintenance routine and making sure you're keeping your furnace running smoothly will keep it generating free heat for your business for many years to come. Failure to maintain your waste oil furnace ...

  • You Don’t Need to Generate Waste Oil to Save Money with a Waste Oil Furnace

    Waste oil furnaces can save on energy expenses for businesses who convert their used petroleum products into fuel for heat. Cutting costs by recycling waste oil makes good bottom line business sense. And waste oil heaters also help companies act on their commitment to preserving the environment by reusing potentially hazardous waste and preventing it from entering the eco-system. For companies ...


    By Clean Energy Heating Systems

  • 8 Types of Businesses that Can Save BIG with a Waste Oil Heater

    Besides the attraction of their environmentally-friendly attributes, waste oil heaters are emerging as a “must have” for certain types of businesses for an even more compelling reason: A waste oil furnace can literally convert an otherwise worthless by-product into substantial savings on energy costs. So, if you’ve got a business that generates used petroleum products in your ...


    By Clean Energy Heating Systems

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • 3 Reasons Your Business Should Have a Waste Oil Heater

    All businesses that generate petroleum waste run up against similar challenges. Regulations and increasing energy costs to keep operations going certainly don’t make it easy to maintain a healthy bottom line. But along with those challenges, there are opportunities - thanks to waste oil heaters that burn used motor oil, transmission fluid and other petroleum products. With the benefits of ...


    By Clean Energy Heating Systems

  • Much light, little heat efficiency

    Energy efficiency in the US is much light and little heat – literally.  Government policy pays a great deal of attention to saving electricity, but focuses little on the thermal energy we waste.  “Policy is electricity-centric in the US. Unless you are making kilowatts, the most efficient investments are off the radar,” said Rob Thornton, president of the ...

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • Client - Oil Refinery, Eastern Europe

    Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe ...


    By Econotherm UK Ltd

  • 7 Questions You Should Ask a Waste Oil Furnace Salesperson Before You Buy

    As with any other business purchase, you should do your homework before making the decision to buy a waste oil furnace. Any open, honest salesperson from a reputable company will be happy to inform and educate you on what you can expect from installing a waste oil burner in your facility. Being in the know to make an empowered buying decision is your first step to gaining the cost-savings and ...

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Eco-Friendly Thinking: Heating Your Home and Water With Biomass Fuel and Appliances

    With today’s struggles with carbon footprints, pollution, and finite energy sources, people are becoming more environmentally conscious. And if you’re thinking of transforming your home into a more eco-friendly structure, there’s a lot to consider. If you want to stray from your oil, gas, or electric heating system, consider investing in a biomass heating ...


    By Uzelac Industries, Inc

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • The performance and emission characteristics of a diesel engine using preheated Kusum oil and Kusum diesel blend

    Rapidly depleting conventional petroleum resources have prompted research for alternative fuels. Among various possible options for internal combustion engines, fuels derived from triglycerides (vegetable oils/animal fats) are a promising substitute for diesel fuel. Vegetable oils pose some detrimental characteristics like high viscosity and low volatility compared to diesel fuel. In the present ...


    By Inderscience Publishers

  • Amit Kumar and Gregory Stephanopoulos on turning waste gases into biofuels

    Research conducted by Kumar, along with a team led by Professor Greg Stephanopoulos, looks to the future of emissions reduction and recycling. Original story at MIT News One of the most promising ways to combat carbon emissions is to transform those emissions into ...

  • How did palm oil become such a problem — and what can we do about it?

    Production of this ubiquitous ingredient is devastating for the environment. Solutions are complex, but they are out there. Last August, from the window of a jet high over Sumatra, I counted nearly a dozen plumes of smoke rising from the vast jungles and plantations below. Some more than a half-mile wide, they looked like pillars holding up the sky. That week the ...


    By Ensia

  • How many gallons of fuel are produced in each batch of 10 tones pyrolysis plant?

    How many gallons of fuel are produced in each batch of 10 tones pyrolysis plant? Used tires, scrap tires Big truck tires 45%-- 50% Car tires 40% Bicycles and motorcycles tires 30%--35% fuel oil from waste tire are used in below industries A.power plant factory B.glass factory ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you