wind turbine production Articles

  • Drones for Wind Turbine Inspection

    Unmanned Aerial Vehicles and Inspection Services for Wind Turbines: Global Market Assessment and Forecasts By the beginning of 2015, there were nearly 270,000 individual wind turbines operating globally. The more than 800,000 blades spinning on these turbines are battered by the elements over time and gradually wear out. Deterioration can cause reduced energy ...

  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Deep research on China wind turbine blade industry

    It was a professional and depth research report on China Wind Turbine Blade industry. Since 2009, the price of China's wind turbine blade has decreased substantially, which is a big challenge for these new entrants and existing wind turbine blade manufacturers. On the development trends of current domestic wind power equipment market, supply and demand tension has been greatly eased with the ...


  • Productivity of small wind turbines for various wind potentials conditions: application in Bulgaria and Corsica

    Less or more accurate power curve models are generally used to simulate the wind turbine electrical production versus the available wind speed. However, if such models are adapted to large machines, this is not the case for small ones. The objective of this paper is to study the impact of different small-scale wind turbines power curves and wind distributions on the electrical production. An ...


    By Inderscience Publishers

  • The effect of ocean waves on offshore wind turbines

    The Ocean has a varying surface roughness where the roughness length is determined by the characteristics of the waves. In this paper, a method is established where the roughness length of the ocean is calculated from the wind speed and the fetch length. The fetch length depends on the wind direction and a case study is performed for a wind turbine exposed to wind blowing in two opposite ...


    By Inderscience Publishers

  • Hansen transmissions - wind turbine gearbox testing with PULSE

    The Wind Energy Market Wind energy is one of the fastest growing power generation technologies. The level of annual installed capacity has grown at an average rate of 27.6% p.a. for the past five years. High fuel prices and increased focus on global warming and renewable energy resources have contrib- uted to an increased investment in the development of wind technology over the last three ...

  • CU-Boulder leading study of wind turbine wakes

    While wind turbines primarily are a source of renewable energy, they also produce wakes of invisible ripples that can affect the atmosphere and influence wind turbines downstream -- an issue being researched in a newly launched study led by the University of Colorado Boulder's Julie Lundquist, assistant professor in the atmospheric and oceanic sciences department. The study, called the Turbine ...


  • Does Wind Turbine Blade Length Really Matter?

    Simply put: Longer wind turbine blade length means greater power production. Blades capture the wind which forces the rotation of the rotor; longer blades means more area for the wind to push against, which means greater force and rotational power. However, how much difference does blade length make overall, in comparison to other factors? There is a standard formula that can be used to apply the ...

  • VENSYS Controls Rotor Position on Wind Turbines with TURCK uprox®+ Sensors

    VENSYS wind turbines, built with TURCK uprox®+ Sensors, allow for sufficient wind production even in low wind ...


    By TURCK

  • Small Wind Turbines tested: “Fortis Montana best performance”

    The market for commercial wind turbines is maturing even as they get bigger and bigger, but the market for small wind turbines is quite young, with some people comparing it to the car industry early in the 19th century. Although some manufacturers have been in the business for over two decades, most suppliers are from this millennium. And that shows. As in most immature markets, there are ...


    By Fortis Wind Energy

  • GE, Harbin form joint venture to market wind turbines in China

    GE Energy (Atlanta, GA) announced that it has formed a joint venture with China’s Harbin Electric Machinery (HEC) to produce GE-designed wind turbines for sale in the Chinese wind energy market. Anticipating a six-fold increase in China’s wind power capacity by 2020, the joint-venture company will produce turbines for both terrestrial facilities and offshore wind farms. GE ...

  • Multi-megawatt wind turbines for offshore use: aspects of Life Cycle Assessment

    Life Cycle Assessment (LCA) is an instrument to quantify environmental impacts of the entire energy supply chain. According to the LCA, an appropriate indicator system should comprise all steps of a system's life cycle: production, operational and disposal processes ("cradle-to-grave"). Cumulative Energy Demand (CED) might be seen as one part of LCA as far as the depletion of energy resources in ...


    By Inderscience Publishers

  • Renewable energy production issues with the Cape Cod offshore wind energy programme

    This paper evaluates the first offshore wind farm proposal in the USA. It is being put forward by Cape Wind Associates, a Boston-based firm that wishes to build 170 turbines five miles offshore in Nantucket Sound. The proposed development would supply up to 95% Cape Cod's energy needs and 2% of the energy requirements for the eastern New England region, preventing the need for additional fossil ...


    By Inderscience Publishers

  • Analysis of vertical wind shear in the Southern Great Plains and potential impacts on estimation of wind energy production

    This paper describes the analysis of near-surface wind speeds in Western Oklahoma. The goals of this research are to characterise the nocturnal low-level jet (LLJ) in the region, and to assess the impact wind variability, vertical shear and the LLJ on wind energy calculations. Results show the seasonal variability in wind characteristics as well as in the vertical wind shear, and also illustrate ...


    By Inderscience Publishers

  • Wind Energy Production Estimates: Moving Beyond Time Averages

    No need to be a statistician to see that averages are often useful to compare different things. And yet, they often fall short as a true measure of performance. For instance, we use averages to compare the current weather against the climate normals or to get a sense of how our favorite sport team or player is doing. Team (player) statistics are a concise way of combining the scores from many ...


    By AWS Truepower, LLC

  • 2011-2015 Deep Research Report on China Wind Turbine Blade Epoxy Resin Industry

    “2011-2015 Deep Research Report on China Wind Turbine Blade Epoxy Resin Industry” was professional and depth research report on China Wind Turbine Blade Epoxy Resin industry. This report has firstly introduced Wind Turbine Blade Epoxy Resin definition classification industry chain etc related information. Then introduced Wind Turbine Blade Epoxy Resin manufacturing technology ...


  • Life cycle assessment of a 150 MW offshore wind turbine farm at Nysted/Roedsand, Denmark

    The purpose of this life cycle assessment (LCA) was to illuminate and describe the potential environmental impacts caused by an offshore wind turbine farm (WTF) throughout its lifetime and use this knowledge in the planning and improvement of future WTFs. The LCA was based on experience from the LCA on Danish electricity and district heating [1] as well as the offshore WTF project at ...


    By Inderscience Publishers

  • Analysing the wind turbine innovation systems in The Netherlands and Denmark using the cyclic innovation model

    This paper analyses the development of wind power in The Netherlands and Denmark in the period 1973-2000 with the cyclic innovation model (CIM). CIM regards innovation as a cyclic process in which different actors constantly develop and exchange knowledge through four different types of cycles: hard science cycle, soft science cycle, integrated engineering cycle, and differentiated valorisation ...


    By Inderscience Publishers

  • Wind farms benefting the region

    Wind farms as close as Benton and White counties—and others around the world—are boosting Tippecanoe County’s economy by at least $20 million a year, reports Jody Hamilton, director of economic development for Greater Lafayette Commerce. “From land title searches to construction labor and turbine components, businesses in Greater Lafayette are enjoying new revenues, and that figure doesn’t ...


    By Fleetmatics

  • Measuring Offshore Wind Resources

    To select the right offshore wind site, estimate the future energy output of a wind farm, and determine the best layout for the turbines, project developers must conduct wind resource assessment (WRA) campaigns on site. This is a critical phase of the successful development of wind farms. WRA campaigns on terrestrial sites have traditionally been performed using meteorological towers equipped ...


    By NRG Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you