wood waste gasification Articles

  • Co-gasification of wood and polyethylene with the aim of CO and H2 production

    Abstract  This article describes the gasification of polyethylene–wood mixtures to form syngas (H2 and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions ...


  • Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application

    The purpose of this study was to establish a fuel process for an advanced power generation system in which hydrogen-rich synthesis gas, as the fuel for the molten carbonate fuel cell (MCFC), can be extracted from biomass via gasification and reforming technologies. Experiments on waste wood gasification were performed using a bench-scale gasification system. The main factors influencing hydrogen ...


    By Springer

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Exergetic performance assessment of gasification and pyrolysis processes of pre-treated wood board wastes

    This paper investigates exergetic performance of gasification and pyrolysis processes and compares their exergy efficiencies, using the experimental data on a two-step process of thermo-chemical conversion of Wood Board (WB) wastes. The exergy values of biomass samples change from 17.49 MJ/kg to 24.57 MJ/kg, respectively. Hydrogen produced from pyrolysis step of gasification varies between 17 ...


    By Inderscience Publishers

  • Preliminary studies of lignocellulosics and waste fuels for fixed bed gasification

    This study was carried out to understand the decomposition behaviour of a range of biofuel and waste feedstock during gasification in a downdraft gasifier. A laboratory scale large sample thermogravimetric analyser (LSTA) is used which allows the data on burn-out characteristics of different fuel particles to be measured under agitated conditions. The conditions chosen simulate the combustion ...


    By Inderscience Publishers

  • The development of biomass gasification technology towards market penetration in China

    Biomass is the second most frequently used fuel, after coal, in China, which accounts for 20% of primary energy consumption. Though the main usage of biomass is for household cooking, the newly developed biomass gasification technology, especially the circulating fluidized bed gasification (CFBG) technology, has laid the foundations for allowing biomass gasification industry penetration into the ...


    By Inderscience Publishers

  • Research on gasification process of loose biomass material with oxygen-enriched air in fluidised bed gasifier

    Fluidised bed gasification technology with oxygen-enriched air suitable for gasifying loose biomass materials was developed. Gasification experiments with different biomass materials such as rice straw, rice hull, wheat straw, sawdust and municipal wastes, were carried out. The tests showed that biomass materials can be gasified continuously at a temperature between 600 and 750°C. The heating ...


    By Inderscience Publishers

  • Case study - ElectraTherm green machines generate electricity from wood waste at mill in Oregon

    ElectraTherm commissioned its second Green Machine at an integrated wood products mill in Wallowa, Oregon. Together, the two machines operate off the waste heat of a biomass boiler to generate emission-free electricity. Integrated Biomass Resources (IBR) processes small-diameter timber into various wood products, such as firewood and fence posts. Wallowa Resources Community Solutions, Inc. ...


    By ElectraTherm

  • Energy from biomass and waste – case studies in China

    With its vast territory and abundant biomass resources, China appears to have suitable conditions to develop biomass energy. It has long been recognised that it is important to develop advanced technologies for conversion of biomass into clean and convenient fuels in order to raise the efficiency of biomass energy utilisation and alleviate air pollution. Through past efforts some progress in ...


    By Inderscience Publishers

  • New methods of hydrogen production are being deployed which are helping increase the efficiency of biomass facilities, creating high value clean energy from sources of waste

    Biomass can easily be converted to hydrogen using decade’s matured, highly reliable technology that is simply applied in non-standard ways. In large scale anaerobic digesters and other biogas projects (including landfill gas) you can maximize the utility of the natural gas product by converting it to high purity hydrogen fuel. In modern gasification plants, operators will effectively be ...


    By Verde LLC

  • Multifuel-fired Combined Heat and Power Plant - Case study

    Måbjergværket is the first combined heat and power (CHP) plant in Denmark to use a fuel combination consisting of waste, wood chips, straw and natural gas. Måbjergværket is owned and operated by DONG Energy. Måbjergværket supplies the approximately 55,000 inhabitants of the cities of Struer and Holstebro with direct heating, and the electricity is delivered to ...


    By Babcock & Wilcox MEGTEC LLC

  • Using Venturi Scrubber Technology for Syngas Cleaning

    As part of our nation's program to reduce dependence on fossil fuels, various gasification technologies are being applied. These processes take renewable organic material and, through the application of heat and pressure, convert the materials into syngas for further use. Arguably, in nearly all of these processes, the most critical design aspect is the reliable and efficient removal of ...


    By Bionomic Industries Inc.

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


  • Ethanol, Biomass Plants Planned for Minnesota

    Proposed facilities prepare to turn organic residuals into electricity, methane and synthesis gas “with minimal emissions and more profit.” AN ETHANOL plant in Little Falls, Minnesota is building an on-site gasifier that will convert wood waste and distiller's grains to gas for generating electricity and heat to serve the needs of the Central Minnesota Ethanol Cooperative. At the same time, ...


    By BioCycle Magazine

  • TAIM WESER, at the forefront in biomass cogeneration solutions

    The state-of-the-art biomass gasification plant, developed by TAIM WESER utilizing proprietary technology, is now up and running successfully, joining the range of technological products offered by the company. This solution offers clients high energy efficiency, streamlined processes and a design that, owing to its compact dimensions, allows the equipment to be installed at the location where ...


    By Taim Weser S.A.

  • Small-scale heat and power at B.C. mills

    Fred Scott introduced the B.C. Bioenergy Network (BCBN) as an alliance between Pristine and Nexterra Energy Corp. BCBN is a network of 15–20 individuals, with 10 MW power plants located across B.C. at mill operations in forest communities. Nexterra has developed a proprietary gasification technology that “takes wood waste material and [produces] clean burning synthetic gas or syngas,” Scott said. ...

  • Greenhouse packs a power punch

    Closed loop system utilizes gasification, algae ponds and anaerobic digestion to convert wood waste to a variety of products, including biofuel, biogas and a soil amendment. MICHAEL Smith is supervising the first commercial-scale Green Power House at the F.H. Stoltze Land and Lumber Co. near Columbia Falls, Montana. Smith, a physicist, has designed a system to take waste products and turn them ...


    By BioCycle Magazine

  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • Commericalizing cellulosic ethanol

    Cellulosic biofuels, produced from nonfood feedstock, are expected to play a critical role in reducing the country's dependence on imported oil. EISA, the Energy Independence and Security Act of 2007, calls for the production of 100 million gallons per year (mgpy) of cellulosic biofuels by 2010, with a longer term goal of 16 billion gallons by 2022.Achieving these goals will not be easy. Several ...


    By BioCycle Magazine

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you