Random media, in addition to high pressure drop, are also associated with common operational problems when used as the heat recovery media in RTO units. These problems include settling and nesting which leads to even higher pressure drop (and hence higher operating expenses), as well as degradation over time.
Heat Recovery Steam Generators (HRSG) & Blowdown Pump Stations
Romtec Utilities engineers and supplies pump stations for many different applications for industrial facilities across the country. These facilities range from chemical manufacturing to oil & gas refineries, and power generation is another industrial market where Romtec Utilities excels. We have supplied many different types of pumping systems for power gen facilities for wastewater, condensate, and other types of process water. A frequent scenario for a Romtec Utilities pump station is pumping for a heat...
Investigating the interactions of decentralized and centralized wastewater heat recovery systems
In the urban water cycle there are different sources for extracting energy. In addition to potential and chemical energy in the wastewater, thermal energy can also be recovered. Heat can be recovered from the wastewater with heat exchangers that are located decentralized and/or centralized at several locations throughout the system. It can be recovered directly at the source (e.g. in the showers and bathrooms), at building block level (e.g. warm water tanks collecting all grey water), in sewers or at the wastewater...
Case study - Waste heat generates steam and savings
OVERVIEWA coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost. The facility was looking for additional ways to decrease their exhaust air temperature and reduce operating costs. ACTIONThe high exhaust temperature (above 650°F) and large airflow (12,650 SCFM) in the...
Case study - Increasing primary heat recovery
OVERVIEWTekra Corporation is a custom coater of plastic films in Wisconsin, where state regulations require over 98% of the Volatile Organic Compounds (VOCs) emitted from their process be destroyed in an oxidizer system. While considering their first oxidizer system, Tekra`s Engineers did their homework and invested in an early model Regenerative Thermal Oxidizer (RTO). While at the time RTOs were not the cheapest oxidizer option capital-wise, Tekra knew that long-term, an RTO was their best choice for reliable...
Ground Source Heat Pump installed in eco house
This case study looks at a ground source heat pump being installed in London. A Ground Source Heat Pump was chosen as a sustainable and energy efficient way to provide 100% space heating and hot water for this 550m2 new build eco-house in East London. A Heat Recovery Mechanical Ventilation System was also utilised, which, together with Solar Thermal hot water and LED lighting give this stunning property maximum energy efficiency. Please take a look at the PDF attached to get a better idea.