Nuvation BMS Selected for Island's Microgrid
CBS Power Solutions selected Nuvation Energy's high-voltage battery management system for a grid energy storage system located on the island of Lifuka.
Lifuka, Kingdom of Tonga
Lifuka is a 4.4 square mile island in the Kingdom of Tonga. Previously receiving power exclusively from diesel generators, the Kingdom contracted CBS Power Solutions to deliver a renewable energy storage system that meets the government’s mandate to obtain 50% of grid power from clean energy. CBS installed a solar + storage microgrid in Lifuka to reduce the island’s dependence on diesel generators.
The project began in 2016 and was completed in 2017. Nuvation Energy installed a Nuvation BMS™ High-Voltage Battery Management System that would provide precise State of Charge (SOC) information to the Siemens power conversion systems (PCS) to help manage the charge and discharge process. The BMS also provides remote access to battery performance data.
“The granular sharing of data between the BMS and PCS can double or even triple the life of lead batteries.” Joseph Xavier, Director of Marketing, Nuvation Energy
The project features a solar array and 480 kW / 495 kWh of battery storage. The lead batteries used for the project are 2V valve regulated HOPPECKE cells. The installation of this microgrid reduced the island’s dependence on diesel generators as a primary power source by 50%.
The Nuvation Energy BMS communicates with a pair of 300 kW Siemens inverters and an energy management system that work together to charge the battery cells from the PV array during the day and provide power to the utility grid at night. View more project details here.
Lead batteries minimized project costs by eliminating the need for the complex fire suppression and thermal management systems often required by more volatile battery chemistries. They provided a cost-effective solution and are recycled at end of life.
While lead batteries are very resilient, continual overcharging and/or over-discharging will significantly shorten their life. A BMS provides battery module level SOC information to the PCS, enabling the PCS to precisely manage the charge and discharge process.
This granular sharing of data between the BMS and PCS can double or triple the life of the lead batteries. Nuvation BMS is also able to disconnect contactors if a fault condition develops that could damage the cells.
In an ESS that contains dozens or hundreds of battery modules, the communications and safety features added by the BMS extend the life of the lead batteries to a degree that recovers the BMS cost many times over during the life of the ESS. Additionally, maintenance personnel are provided with remote access to battery State of Health data, reducing the need for costly “check-up” service calls. The SOH data also includes the granularity needed to identify cells and other components that may need replacement, often before an emerging issue visibly impacts the performance of the ESS.
Read more information including Battery Innovation's full case study here.
No comments were found for Nuvation BMS Selected for Island's Microgrid. Be the first to comment!