IWA Publishing
London ,
United Kingdom E14 2BA
United Kingdom
- Home
- Companies
- IWA Publishing
- Articles
- Power use methods for optimal design of ...
Power use methods for optimal design of WDS: history and their use as post-optimization warm starts
This paper describes an extension to the optimal power use surface (OPUS) methodology, which consists of applying a metaheuristic post-optimization process after a network has been designed through the OPUS algorithm. Four different types of metaheuristics were tested in this study. The OPUS methodology focuses on the setting up of efficient ways in which energy is dissipated and flow is distributed, thereby obtaining deterministic design after a few iterations. On the other hand, the stochastic techniques used for the post-optimization step mimic different phenomena, usually requiring several iterations. The proposed methodology is tested on four networks; three of these are benchmark problems. When compared to the results obtained through other methodologies, this algorithm stands out for allowing designs with constructive costs very close to the lowest found in other investigations. However, when compared to the results obtained through the OPUS algorithm alone, this approach reduces the capital cost of the network by a very small percentage while increasing the number of iterations required. This extension to the OPUS methodology proves that following hydraulic principles allows near-optimal results to be obtained, whose improvement demands a considerable number of iterations, providing minimum benefit as the reduction in cost is only 1% at most.
-
Most popular related searches
Customer comments
No comments were found for Power use methods for optimal design of WDS: history and their use as post-optimization warm starts. Be the first to comment!