Tips of installing the coal fired hot water boiler


Courtesy of

After buying an coal fired hot water boiler as being the heat power, the other thing the enterprise should think about is to install it. As all of those other boilers, the installation work likewise need the customer’s attention. Because the installation quality is directly connected with the operation plus the work efficiency with the coal fuel boiler.

The requirements on the boiler’s installation add the selection of site, the pavement of circuit and the pipeline along with the installing of the chimney. Listed here are some strategies for detailed installation offered by industrial boiler supplier  ZG boiler group: 

The selection of site:

Considering that the coal fired boiler is really a noisy equipment which produces pollutant, the site needs to be ventilate,dry and remote from your downtown. Meanwhile the web page must be firm and flat , the boiler ought to be placed 1.5 meters away from the wall in order that it is convenient for being installed and keep.

Design from the circuit:

Design from the coal fired boiler’s circuit needs to be finished with the qualified electrician, the electrical path must be definately not temperature,moisture, rain water and pedestrian passage. Finally, it can not be used until each of the procedure and voltage, current are mould to the needs.

The pavement in the boiler’s pipeline 

the expansion tank from the coal fired boiler or air communicating pipe really should be placed at most of the 4 meters over the boiler. The hot water exit should not be pre-loaded with valve if it bears compressure. Every one of the pipe needs to be inspected with water inside to substantiate that each one the valves can be freely open and closed,without leakage and blocking. Then it the boiler might be brought into use.

Customer comments

No comments were found for Tips of installing the coal fired hot water boiler. Be the first to comment!