Bioenergy Applications in Australasia

  • Premium

    Power generation solutions for renewable energy sector

    Solar has a history of supporting renewable fuels, committing research and development toward modifying our turbines to burn various low energy fuels efficiently.

    By Solar Turbines Incorporated - Caterpillar Distributor in Rowville, AUSTRALIA.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. Distributor in Scoresby, AUSTRALIA.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in AUSTRALIA.

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with...

    By Metrohm AG Distributor in AUSTRALIA.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE Office in Artarmon, AUSTRALIA.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Premium

    Odor control for biofuel plants

    By Simple Solutions Distributing LLC Distributor in Hobart, AUSTRALIA.

  • Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group Office in Carrum Downs, AUSTRALIA.

  • Continuous carbonisation technology solutions for waste management industry

    The hierarchy of waste management places resource recovery as preferred over incineration or landfilling. Pyrocal CCT systems allow recovery of resources that traditional waste to energy (WTE) processes do not.

    By Pyrocal Pty Ltd. based in Wellcamp, AUSTRALIA.

  • Waste shredding for the biomass industry

    Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

    By Metso Recycling Equipment Distributor in AUSTRALIA.

  • Storage and cover solution for bioenergy industry

    CST Industries is the world`s leading complete storage and cover solution provider for BioEnergy applications.

    By CST Industries Inc Office in Sunrise Beach, Queensland, AUSTRALIA.

  • Continuous carbonisation technology solutions for industrial energy industry

    Energy consumption is at the core of most industrial processes and is often a major operating cost. Conventional energy sources can be expensive. Pyrocal CCT systems can generate energy from a diverse and changing range of biomass and man-made materials.

    By Pyrocal Pty Ltd. based in Wellcamp, AUSTRALIA.

  • Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ...

    By ANDRITZ MeWa - ANDRITZ Group Office in Carrum Downs, AUSTRALIA.

  • Industrial butterfly valve solutions for power generation sector

    The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

    By Hobbs Valve Distributor in Wangara, AUSTRALIA.

  • Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable...

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments Distributor in Otahuhu, NEW ZEALAND.

  • Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments Distributor in Otahuhu, NEW ZEALAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you