The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and...
The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for
Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.
A shift towards replacing fossil fuels with more renewable energy resources is expected to be a key driving factor in the growth of the Biogas Market. To help meet future global energy demand, incentives and even subsidies have been provided to encourage farmers, municipalities and industrial producers to increase their production volume. Biogas is produced by the breakdown of organic matter, typically plant and animal waste products, in the absence of oxygen using anaerobic organisms. The process is fully...
Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.
ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.
Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.
Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.
You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.
Composition of Natural Gas, Syngas via VOC SpeciationThe composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.
Ethanol can be produced from a variety of raw materials such as corn, sugar cane, soy beans, switchgrass, corn stover, and cellulosic materials. Corn can be processed in a dry or wet mill to produce ethanol. Advances and research in ethanol continues to find new and more energy efficient ways to produce ethanol and biofuels and new raw materials for production.
Industrial processes based on fermentation are a major, mixer intensive segment of the Chemical Process Industries, and many products are produced via fermentation. Fermentation uses micro-organisms to convert carbon or nitrogen based raw materials into new products.