Bioenergy Applications in Latin America

  • Premium

    Power generation solutions for renewable energy sector

    Solar has a history of supporting renewable fuels, committing research and development toward modifying our turbines to burn various low energy fuels efficiently.

    By Solar Turbines Incorporated - Caterpillar Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with...

    By Metrohm AG Distributor in BRAZIL.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. Distributor in Valinhos, BRAZIL.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and...

    By AMETEK MOCON - Baseline Distributor in Buenos Aires, ARGENTINA.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in BRAZIL.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific Distributor in Buenos Aires, ARGENTINA.

  • Premium

    Innovative gas measurement solutions for biogas industry

    A shift towards replacing fossil fuels with more renewable energy resources is expected to be a key driving factor in the growth of the Biogas Market. To help meet future global energy demand, incentives and even subsidies have been provided to encourage farmers, municipalities and industrial producers to increase their production volume. Biogas is produced by the breakdown of organic matter, typically plant and animal waste products, in the absence of oxygen using anaerobic organisms. The process is fully...

    By Advanced Micro Instruments, Inc. (AMI) Distributor in São Paulo, BRAZIL.

  • Premium

    Biomass Pelleting - Wood Pelleting

    By Amandus Kahl GmbH & Co. KG Distributor in Munro, ARGENTINA.

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE Office in Centro. Vinhedo/SP, BRAZIL.

  • Premium

    Pelleting plants for Biomass industry

    For the processing of biomass for energy recovery, AMANDUS KAHL offers its customers pelleting plants for two different sectors.

    By Amandus Kahl GmbH & Co. KG Distributor in Munro, ARGENTINA.

  • Premium

    Industrial waste solutions for Pelleting of Biomass industry

    Possible applications of the KAHL pelleting press: Wood waste, wood shavings, wood chips, sawdust, wood and grinding dust, straw, miscanthus, bagasse and other biomass.

    By Amandus Kahl GmbH & Co. KG Distributor in Munro, ARGENTINA.

  • Premium

    Process equipment and technology solutions for oleochemistry - biodiesel, fatty acids industry

    Decades of experience pay off, especially in the field of oleochemistry. Through the use of our technologies, high-quality products can be produced with a wide variety of raw materials, taking into account individual requirements. Product purity, environmental compatibility and minimal energy consumption are the focus. Therefore, innovative systems for energy recovery and sophisticated process links are a matter of course.

    By GIG Karasek GmbH Distributor in Teresópolis, BRAZIL.

  • Premium

    Biomass Pelleting - Wood Pelleting

    By Amandus Kahl GmbH & Co. KG Distributor in Munro, ARGENTINA.

  • Premium

    Biomass Pelleting - Straw Pelleting

    By Amandus Kahl GmbH & Co. KG Distributor in Munro, ARGENTINA.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific Distributor in Buenos Aires, ARGENTINA.

  • Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable...

  • Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high...

  • Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group Office in Pomerode, BRAZIL.

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE Office in D.Ind.Gravataí, RS - BR, BRAZIL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you