Only show results in Texas? Ok

Bioenergy Applications

  • Combustion Analyzers for Condensing Boilers & Furnaces

    Combustion efficiency is a measurement of how well any given fuel is being burned and converted into useful energy (e.g.: heat, hot water, steam). The calculations are based on 3 MAJOR Factors:

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • CO2 neutral manufacturing of cars and trucks

    With large assembly halls to heat and very strict temperature- and humidity reqirements for their painting lines, car assembly facilities are big consumers of power and thermal energy. VYNCKE designs and builds reliable biomass energy solutions capable of not only delivering enough heat to keep assembly halls and offices warm but also guarrantee the required steadiness and accuracy in heat flow needed for the critical painting process. Hot water or superheated water is used to regulate the humidity and temperature...

    By VYNCKE based in Harelbeke, BELGIUM.

  • Continuous carbonisation technology solutions for industrial energy industry

    Energy consumption is at the core of most industrial processes and is often a major operating cost. Conventional energy sources can be expensive. Pyrocal CCT systems can generate energy from a diverse and changing range of biomass and man-made materials.

    By Pyrocal Pty Ltd. based in Wellcamp, AUSTRALIA.

  • Brewing beer equpiment

    Stainless steel brewing beer cylinder, also called round slot tube. It is made of stainless steel wire, which is the most popular type because of outstanding chemical stability and corrosion resistance. The wedge wire screen tube is composed of working p

    By UBO International Co., LTD based in Anping, CHINA.

  • Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Biomass Drying

    Biomass produces a cleaner, renewable energy, reducing harmful carbon dioxide emissions, all while creating lower operating costs for power plants. Biomass, the by-product of pulp and paper, agriculture, and municipal sludge, is perhaps the oldest source of renewable energy on Earth. Biomass' use in energy production is currently growing worldwide at an exponential rate.

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Woody biomass gasification

    Converting wood waste into electricity—lumber mill off-cuts, wood from forestry thinnings (cleared of leaf matter), disposal of wooden pallets and crating (with nails removed). Wood is chipped, dried, and used to produce electricity, reducing electrical costs and paid disposal. Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its...

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Air emissions solutions for boilers and burners sector

    Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion plants.

    By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.

  • Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield. Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate Gas parameters: CH4...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Industrial butterfly valve solutions for power generation sector

    The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Magnets for the power station industry

    Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Innovative Pump Technology for Energy Industry

    Different temperatures, varying media – and always the demand for reliability, long service life and efficiency. EDUR additionally offer the principle of application-specific pump design.

  • Monitoring Solutions for Biomass

    Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety control.

    By VisionTIR based in Malaga, SPAIN.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience...

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Hand Held Analyzer for Measuring Combustion Efficiency & Emissions from a Sugar Mill as a Cogeneration Process

    For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Micro SNCR System for Small Biomass Boiler Industry

    FlowVision’s Micro SNCR system has been specifically developed for the small biomass boiler industry. As more stringent emission regulations are forced upon the small scale boiler sector, post combustion NOx reduction technology is needed to achieve the limits. The ideal solution is to install an SNCR system, however, conventional systems can be large and complicated. The FlowVision Micro SNCR system provides a compact cost effective solution to your NOx reduction needs.

    By FlowVision A/S based in Odense N, DENMARK.

  • Renewable energy for industrial applications

    We provide renewable energy for industries to the benefit of their environmental report. Industries targeting environmental footprint reductions will benefit from our technology for sustainable energy production based on biomass. Our patented gasification process has world class low air emissions, which ensures sustainable energy production with minimum impact on the local air environment. Our agile process regulation allows steam production to change according to alternating industrial processes in e.g. batch...

    By Dall Energy based in Hørsholm, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you